[Thu Mar 29 13:06:35 2012] Detection parameters:
  Position = (300.5, 282.2) = 0 42 52.10 41 14 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.6 +/- 21.5
  Background counts = 144.7
  Rate = 0.006 +/- 0.001

[Thu Mar 29 13:06:38 2012] Off-axis axis estimate = 1.19'
[Thu Mar 29 13:11:38 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:11:38 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Thu Mar 29 13:11:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.118
[Thu Mar 29 13:11:38 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 7.02"
[Thu Mar 29 20:42:36 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src73.ximg exists
[Thu Mar 29 20:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src73.csv
[Thu Mar 29 20:42:36 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Mar 29 20:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src73.csv
[Thu Mar 29 20:42:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:42:38 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Mar 29 20:42:38 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Mar 29 20:42:38 2012] Fit fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Fri Mar 30 03:53:57 2012] Source 79 is offset by -5.882981 and -7.274343 pixels which is larger than
2 X fitted extent = 6.457517 x 6.457517, not incorporating fit results
[Fri Mar 30 03:53:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:53:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:53:58 2012] Assessing source extent using major
[Fri Mar 30 03:53:58 2012] Source does appear to be extended
[Fri Mar 30 03:53:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 03:55:12 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 03:55:12 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Fri Mar 30 03:55:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.118
[Fri Mar 30 03:55:12 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 7.02"
[Fri Mar 30 09:10:33 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src61.ximg exists
[Fri Mar 30 09:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src61.csv
[Fri Mar 30 09:10:33 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri Mar 30 09:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src61.csv
[Fri Mar 30 09:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 09:10:35 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri Mar 30 09:10:35 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri Mar 30 09:10:35 2012] Fit fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Fri Mar 30 16:39:24 2012] Source 79 is offset by 6.974996 and 5.640737 pixels which is larger than
2 X fitted extent = 1.038032 x 1.038032, not incorporating fit results
[Fri Mar 30 16:39:24 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:39:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:39:24 2012] Assessing source extent using major
[Fri Mar 30 16:39:24 2012] Source does appear to be extended
[Fri Mar 30 16:39:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 16:40:42 2012] XMMSAS src. selection expression = ellipse(26096.518677, 24501.438141, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 16:40:42 2012] Writing source region out to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src79_src.reg
[Fri Mar 30 16:40:42 2012] Extracting stamp from image fullrun_pn_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (263, 245) - (338, 320)
[Fri Mar 30 16:40:42 2012] XMMSAS bgd. selection expression = annulus(26096.518677, 24501.438141, 1087.500000, 2175.000000, X, Y) && !ellipse(29142.652374, 26350.963409, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27406.796800, 26910.718800, 5992.824172, 4659.840134, 0.000000, X, Y) && !ellipse(27774.682000, 26694.898000, 680.555220, 680.555220, 0.000000, X, Y) && !ellipse(25446.254211, 26482.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.353363, 26559.173462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25981.819000, 26029.907200, 349.487210, 317.938409, 15.512600, X, Y) && !ellipse(28189.988000, 26286.018000, 1144.976033, 1144.976033, 0.000000, X, Y) && !ellipse(23583.906000, 25770.682320, 489.643214, 395.056011, 71.568100, X, Y) && !ellipse(26908.188740, 25695.629200, 526.669615, 526.669615, 0.000000, X, Y) && !ellipse(28743.508545, 27528.057373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26018.795349, 27327.711517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25283.312408, 27542.580383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.108826, 26442.036224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.785583, 26489.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.293579, 25793.160339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25316.317078, 25279.197113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29414.152000, 24441.924000, 1244.672036, 1244.672036, 0.000000, X, Y) && !ellipse(28330.949760, 24881.598400, 692.558420, 368.763211, 223.833000, X, Y) && !ellipse(26818.616000, 23459.724000, 1102.792032, 1102.792032, 0.000000, X, Y) && !ellipse(28655.652600, 23382.543200, 414.015212, 414.015212, 0.000000, X, Y) && !ellipse(27179.112183, 21493.171799, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 16:40:42 2012] Writing fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src79.gif
[Fri Mar 30 18:54:54 2012] Mean detx,y = (-68.21, 2435.01) 
[Fri Mar 30 18:54:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 18:55:31 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 18:55:31 2012] Setting source spectrum file to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Fri Mar 30 18:55:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Sat Mar 31 03:31:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 03:31:16 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:09 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:09 2012] Error reading totcts from fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat Mar 31 09:26:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:14 2012] Using photon index=1.80, rate=0.00551, arf fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src79.arf
[Sat Mar 31 09:26:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:14 2012] Updating source flux to 1.4e-14
[Sat Mar 31 09:35:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting