[Thu Mar 29 13:06:31 2012] Detection parameters:
  Position = (300.6, 328.8) = 0 42 52.05 41 17 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.8 +/- 17.3
  Background counts = 125.3
  Rate = 0.007 +/- 0.001

[Thu Mar 29 13:06:38 2012] Off-axis axis estimate = 2.21'
[Thu Mar 29 13:11:38 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:11:38 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Thu Mar 29 13:11:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.853
[Thu Mar 29 13:11:38 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 7.53"
[Thu Mar 29 20:42:36 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src47.ximg exists
[Thu Mar 29 20:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src47.csv
[Thu Mar 29 20:42:36 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu Mar 29 20:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src47.csv
[Thu Mar 29 20:42:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:42:38 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu Mar 29 20:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu Mar 29 20:42:38 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu Mar 29 20:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu Mar 29 20:42:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 03:53:57 2012] Source 49 is offset by -6.282959 and 6.531559 pixels which is larger than
2 X fitted extent = 0.865821 x 0.865821, not incorporating fit results
[Fri Mar 30 03:53:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:53:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:53:58 2012] Assessing source extent using major
[Fri Mar 30 03:53:58 2012] Source does appear to be extended
[Fri Mar 30 03:53:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 03:53:58 2012] Source is confused with source 45
[Fri Mar 30 03:55:12 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 03:55:12 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Fri Mar 30 03:55:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.853
[Fri Mar 30 03:55:12 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 7.53"
[Fri Mar 30 09:10:33 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src41.ximg exists
[Fri Mar 30 09:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src41.csv
[Fri Mar 30 09:10:33 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri Mar 30 09:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src41.csv
[Fri Mar 30 09:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 09:10:34 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri Mar 30 09:10:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri Mar 30 09:10:35 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Mar 30 09:10:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri Mar 30 09:10:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:39:24 2012] Spatial fit model total counts = -1092.960000, observed total counts = 850.000000
[Fri Mar 30 16:39:24 2012] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 16:39:24 2012] Source 49 is offset by -1.555925 and -0.385545 pixels which is larger than
2 X fitted extent = 1.399940 x 11.199541, not incorporating fit results
[Fri Mar 30 16:39:24 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:39:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:39:24 2012] Assessing source extent using major
[Fri Mar 30 16:39:24 2012] Source does appear to be extended
[Fri Mar 30 16:39:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 16:40:40 2012] XMMSAS src. selection expression = ellipse(26107.494568, 28558.317596, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 16:40:40 2012] Writing source region out to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src49_src.reg
[Fri Mar 30 16:40:40 2012] Extracting stamp from image fullrun_pn_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (263, 291) - (338, 366)
[Fri Mar 30 16:40:40 2012] XMMSAS bgd. selection expression = annulus(26107.494568, 28558.317596, 1087.500000, 2175.000000, X, Y) && !ellipse(29142.652374, 26350.963409, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25985.644653, 29899.630432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27406.796800, 26910.718800, 5992.824172, 4659.840134, 0.000000, X, Y) && !ellipse(27774.682000, 26694.898000, 680.555220, 680.555220, 0.000000, X, Y) && !ellipse(25446.254211, 26482.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.353363, 26559.173462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28189.988000, 26286.018000, 1144.976033, 1144.976033, 0.000000, X, Y) && !ellipse(24428.780609, 30628.645721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24274.757050, 30098.534607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25633.983368, 28901.684570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.972900, 28328.779694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.575195, 28003.562500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28743.508545, 27528.057373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26018.795349, 27327.711517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25283.312408, 27542.580383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.108826, 26442.036224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.785583, 26489.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.293579, 25793.160339, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 16:40:40 2012] Writing fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src49.gif
[Fri Mar 30 18:28:31 2012] Mean detx,y = (-2610.72, -581.60) 
[Fri Mar 30 18:28:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 18:29:15 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 18:29:16 2012] Setting source spectrum file to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Mar 30 18:29:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Mar 31 03:05:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 03:05:42 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:08 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:08 2012] Error reading totcts from fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Mar 31 09:26:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:12 2012] Using photon index=1.80, rate=0.00727, arf fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src49.arf
[Sat Mar 31 09:26:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:13 2012] Updating source flux to 3e-14
[Sat Mar 31 09:35:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting