[Thu Mar 29 13:06:26 2012] Detection parameters:
  Position = (299.3, 299.9) = 0 42 52.56 41 15 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3824.3 +/- 77.9
  Background counts = 144.5
  Rate = 0.2 +/- 0.004

[Thu Mar 29 13:06:38 2012] Off-axis axis estimate = 0.12'
[Thu Mar 29 13:11:38 2012] Using EEF radius (= 6.49 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:11:38 2012] Initial guess for spatial extent in simple fitting = 6.49"
[Thu Mar 29 13:11:38 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.008
[Thu Mar 29 13:11:38 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.49"
[Thu Mar 29 20:42:35 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src11.ximg exists
[Thu Mar 29 20:42:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src11.csv
[Thu Mar 29 20:42:35 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Mar 29 20:42:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src11.csv
[Thu Mar 29 20:42:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:42:37 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Mar 29 20:42:37 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Mar 29 20:42:37 2012] Fit fullrun_pn_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Mar 30 03:53:57 2012] Spatial fit model total counts = 7245.380000, observed total counts = 7058.000000
[Fri Mar 30 03:53:57 2012] Offset between fit and detection position for source 11 = 0.182182 pixels
[Fri Mar 30 03:53:57 2012] 6988.880000 total counts/ 5637.590000 bgd. counts: snr = 17.997071
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.182182 pixels
  Position = (299.2, 299.8) = 0 42 52.60 41 15 41.3
  Extent = 4.4 (4.1-4.5)", rotation angle = 0
  Source counts = 1351.3 +/- 83.6
  Background counts = 5637.6
  Rate = 0.1 +/- 0.008
[Fri Mar 30 03:53:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:53:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:53:58 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 03:53:58 2012] Source does appear to be extended
[Fri Mar 30 03:53:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 03:55:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 03:55:12 2012] Initial guess for spatial extent in simple fitting = 4.37"
[Fri Mar 30 03:55:12 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.995
[Fri Mar 30 03:55:12 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 4.37"
[Fri Mar 30 09:10:32 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src11.ximg exists
[Fri Mar 30 09:10:32 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Mar 30 09:10:32 2012] Fit fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_src11 appears to have run properly
[Fri Mar 30 09:10:34 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Mar 30 09:10:34 2012] fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Mar 30 09:10:34 2012] Fit fullrun_pn_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Mar 30 16:39:24 2012] Spatial fit model total counts = 6787.150000, observed total counts = 5716.000000
[Fri Mar 30 16:39:24 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 16:39:24 2012] Spatial fit model total counts = 6975.780000, observed total counts = 6957.000000
[Fri Mar 30 16:39:24 2012] Offset between fit and detection position for source 11 = 0.023227 pixels
[Fri Mar 30 16:39:24 2012] 7102.010000 total counts/ 5816.030000 bgd. counts: snr = 16.862459
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.023227 pixels
  Position = (299.2, 299.8) = 0 42 52.61 41 15 41.2
  Extent = 4.4" x 4.0", rotation angle = 16
  Source counts = 1286.0 +/- 84.3
  Background counts = 5816.0
  Rate = 0.1 +/- 0.008
[Fri Mar 30 16:39:24 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:39:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:39:24 2012] Assessing source extent using major
[Fri Mar 30 16:39:24 2012] Source does appear to be extended
[Fri Mar 30 16:39:24 2012] Computing asymmetry using major and minor axis, asym = 1.10
[Fri Mar 30 16:40:37 2012] Counts = 1285.980000, rescaling region sizes by 2.000000
[Fri Mar 30 16:40:37 2012] XMMSAS src. selection expression = ellipse(25981.819000, 26029.907200, 524.230815, 476.907614, 15.512600, X, Y)
[Fri Mar 30 16:40:37 2012] Writing source region out to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src11_src.reg
[Fri Mar 30 16:40:37 2012] Extracting stamp from image fullrun_pn_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (269, 270) - (329, 330)
[Fri Mar 30 16:40:37 2012] XMMSAS bgd. selection expression = annulus(25981.819000, 26029.907200, 1747.436050, 3494.872101, X, Y) && !ellipse(29142.652374, 26350.963409, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25985.644653, 29899.630432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27406.796800, 26910.718800, 5992.824172, 4659.840134, 0.000000, X, Y) && !ellipse(27774.682000, 26694.898000, 680.555220, 680.555220, 0.000000, X, Y) && !ellipse(25446.254211, 26482.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.353363, 26559.173462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28189.988000, 26286.018000, 1144.976033, 1144.976033, 0.000000, X, Y) && !ellipse(23583.906000, 25770.682320, 489.643214, 395.056011, 71.568100, X, Y) && !ellipse(21928.589966, 24881.213531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26908.188740, 25695.629200, 526.669615, 526.669615, 0.000000, X, Y) && !ellipse(24274.757050, 30098.534607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.926680, 29731.122800, 399.223211, 399.223211, 0.000000, X, Y) && !ellipse(25633.983368, 28901.684570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26107.494568, 28558.317596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23425.162840, 28938.595600, 412.082412, 412.082412, 0.000000, X, Y) && !ellipse(27651.972900, 28328.779694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.575195, 28003.562500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29592.332031, 27484.456482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28743.508545, 27528.057373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26018.795349, 27327.711517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25283.312408, 27542.580383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.108826, 26442.036224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.785583, 26489.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.293579, 25793.160339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25316.317078, 25279.197113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21898.329269, 25384.561951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29455.495140, 24580.812200, 448.146413, 448.146413, 0.000000, X, Y) && !ellipse(26096.518677, 24501.438141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29414.152000, 24441.924000, 1244.672036, 1244.672036, 0.000000, X, Y) && !ellipse(28330.949760, 24881.598400, 692.558420, 368.763211, 223.833000, X, Y) && !ellipse(26818.616000, 23459.724000, 1102.792032, 1102.792032, 0.000000, X, Y) && !ellipse(28655.652600, 23382.543200, 414.015212, 414.015212, 0.000000, X, Y) && !ellipse(22332.281860, 22600.511505, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 16:40:37 2012] Writing fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src11.gif
[Fri Mar 30 17:28:28 2012] Mean detx,y = (-1088.51, 1323.66) 
[Fri Mar 30 17:28:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 17:29:19 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 17:29:20 2012] Setting source spectrum file to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Mar 30 17:29:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Mar 31 09:26:06 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:06 2012] Error reading totcts from fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Mar 31 09:26:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:10 2012] Using photon index=1.80, rate=0.118, arf fullrun_pn_xmm0551690601_pi300-10000_pass1_cl_src11.arf
[Sat Mar 31 09:26:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:10 2012] Updating source flux to 3.4e-13
[Sat Mar 31 09:35:31 2012] Flag p found in src. 11 procflags, skipping spectral fitting