[Thu Mar 29 13:06:59 2012] Detection parameters:
  Position = (369.8, 272.1) = 0 42 25.39 41 13 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.4 +/- 11.8
  Background counts = 9.9
  Rate = 0.02 +/- 0.002

[Thu Mar 29 13:06:59 2012] Off-axis axis estimate = 5.51'
[Fri Mar 30 00:08:47 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 00:08:47 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Fri Mar 30 00:08:47 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.100
[Fri Mar 30 00:08:47 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 9.19"
[Fri Mar 30 03:53:20 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src40.ximg exists
[Fri Mar 30 03:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src40.csv
[Fri Mar 30 03:53:20 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri Mar 30 03:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src40.csv
[Fri Mar 30 03:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 03:53:22 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri Mar 30 03:53:22 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri Mar 30 03:53:22 2012] Fit fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Fri Mar 30 03:54:35 2012] Source 65 is offset by -0.644563 and 8.694273 pixels which is larger than
2 X fitted extent = 1.065770 x 1.065770, not incorporating fit results
[Fri Mar 30 03:54:35 2012] Source 65 is offset by -7.171229 and 1.447169 pixels which is larger than
2 X fitted extent = 1.363490 x 1.363490, not incorporating fit results
[Fri Mar 30 03:54:35 2012] Source 65 is offset by -7.515611 and 1.649261 pixels which is larger than
2 X fitted extent = 1.770326 x 1.770326, not incorporating fit results
[Fri Mar 30 03:54:36 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:36 2012] Assessing source extent using major
[Fri Mar 30 03:54:36 2012] Source does appear to be extended
[Fri Mar 30 03:54:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 03:54:36 2012] Source is confused with source 32
[Fri Mar 30 12:46:56 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 12:46:56 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Fri Mar 30 12:46:56 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.100
[Fri Mar 30 12:46:56 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 9.19"
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src40.ximg exists
[Fri Mar 30 16:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src40.csv
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Mar 30 16:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src40.csv
[Fri Mar 30 16:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:38:53 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Mar 30 16:38:53 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Mar 30 16:38:53 2012] Fit fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri Mar 30 16:40:02 2012] Warning, spatial fit 40 centroid is now closest to src. 32
[Fri Mar 30 16:40:02 2012] Source 65 is offset by -7.505374 and 1.649261 pixels which is larger than
2 X fitted extent = 1.749425 x 1.749425, not incorporating fit results
[Fri Mar 30 16:40:02 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:40:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:40:02 2012] Assessing source extent using major
[Fri Mar 30 16:40:02 2012] Source does appear to be extended
[Fri Mar 30 16:40:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 06:33:45 2012] XMMSAS src. selection expression = ellipse(32122.551056, 23621.497711, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 06:33:45 2012] Writing source region out to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src65_src.reg
[Sat Mar 31 06:33:45 2012] Extracting stamp from image fullrun_mos2_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (332, 235) - (407, 310)
[Sat Mar 31 06:33:46 2012] XMMSAS bgd. selection expression = annulus(32122.551056, 23621.497711, 1087.500000, 2175.000000, X, Y) && !ellipse(32648.737447, 25926.377216, 395.779685, 318.058203, 101.279759, X, Y) && !ellipse(33617.684740, 24037.871200, 290.778408, 290.778408, 0.000000, X, Y) && !ellipse(33708.413330, 22110.300171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30579.778580, 23086.610600, 439.876013, 329.595209, 136.813000, X, Y) && !ellipse(32987.663147, 26416.842651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31434.552460, 22073.360600, 374.938411, 374.938411, 0.000000, X, Y) && !ellipse(32751.386000, 23496.484000, 249.322407, 249.322407, 0.000000, X, Y) && !ellipse(32656.039368, 24157.407410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34394.318909, 22413.748779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29407.148000, 24152.358000, 1247.464036, 1247.464036, 0.000000, X, Y)
[Sat Mar 31 06:33:46 2012] Writing fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src65.gif
[Sat Mar 31 06:49:13 2012] Mean detx,y = (-5209.88, 509.87) 
[Sat Mar 31 06:49:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 06:49:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 06:49:41 2012] Setting source spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Mar 31 06:49:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sat Mar 31 09:21:01 2012] Not generating rmf since there are only 77 counts
[Sat Mar 31 09:21:01 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:27 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:27 2012] Error reading totcts from fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Mar 31 09:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:30 2012] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src65.arf
[Sat Mar 31 09:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:31 2012] Updating source flux to 2e-13
[Sat Mar 31 09:30:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting