[Thu Mar 29 13:06:56 2012] Detection parameters:
  Position = (354.4, 354.3) = 0 42 31.30 41 19 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.8 +/- 11.3
  Background counts = 6.0
  Rate = 0.02 +/- 0.003

[Thu Mar 29 13:06:59 2012] Off-axis axis estimate = 5.73'
[Fri Mar 30 00:08:47 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 00:08:47 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Fri Mar 30 00:08:47 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.791
[Fri Mar 30 00:08:47 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.29"
[Fri Mar 30 03:53:20 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src37.ximg exists
[Fri Mar 30 03:53:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src37.csv
[Fri Mar 30 03:53:20 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Mar 30 03:53:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src37.csv
[Fri Mar 30 03:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 03:53:22 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Mar 30 03:53:22 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Mar 30 03:53:22 2012] Fit fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Mar 30 03:54:35 2012] Source 39 is offset by -4.861221 and -4.509293 pixels which is larger than
2 X fitted extent = 1.096156 x 1.096156, not incorporating fit results
[Fri Mar 30 03:54:35 2012] Spatial fit model total counts = 136.772000, observed total counts = 148.000000
[Fri Mar 30 03:54:35 2012] Offset between fit and detection position for source 39 = 0.440270 pixels
[Fri Mar 30 03:54:35 2012] 133.118400 total counts/ 89.609400 bgd. counts: snr = 4.596236
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.440270 pixels
  Position = (354.0, 354.5) = 0 42 31.44 41 19 39.3
  Extent = 3.3 (2.8-4.2)", rotation angle = 0
  Source counts = 43.5 +/- 11.5
  Background counts = 89.6
  Rate = 0.008 +/- 0.002
[Fri Mar 30 03:54:36 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:36 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 03:54:36 2012] Source does appear to be extended
[Fri Mar 30 03:54:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 12:46:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 12:46:56 2012] Initial guess for spatial extent in simple fitting = 3.26"
[Fri Mar 30 12:46:56 2012] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.961
[Fri Mar 30 12:46:56 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 3.26"
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src37.ximg exists
[Fri Mar 30 16:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src37.csv
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Mar 30 16:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src37.csv
[Fri Mar 30 16:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:38:53 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Mar 30 16:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Mar 30 16:38:53 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Mar 30 16:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Mar 30 16:38:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:40:02 2012] Warning, spatial fit 37 centroid is now closest to src. 27
[Fri Mar 30 16:40:02 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:40:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:40:02 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 16:40:02 2012] Source does appear to be extended
[Fri Mar 30 16:40:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 06:33:45 2012] XMMSAS src. selection expression = ellipse(30750.904996, 30794.961000, 195.627006, 195.627006, 0.000000, X, Y)
[Sat Mar 31 06:33:45 2012] Writing source region out to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src39_src.reg
[Sat Mar 31 06:33:45 2012] Extracting stamp from image fullrun_mos2_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (343, 343) - (365, 366)
[Sat Mar 31 06:33:45 2012] XMMSAS bgd. selection expression = annulus(30750.904996, 30794.961000, 326.045009, 652.090019, X, Y) && !ellipse(31956.606415, 30290.846344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29880.266744, 31346.970200, 460.978413, 460.978413, 0.000000, X, Y)
[Sat Mar 31 06:33:45 2012] Writing fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src39.gif
[Sat Mar 31 06:47:49 2012] Mean detx,y = (397.94, 5206.21) 
[Sat Mar 31 06:47:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 06:48:03 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 06:48:04 2012] Setting source spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Mar 31 06:48:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat Mar 31 09:20:29 2012] Not generating rmf since there are only 43 counts
[Sat Mar 31 09:20:29 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:27 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:27 2012] Error reading totcts from fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Mar 31 09:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:30 2012] Using photon index=1.80, rate=0.00772, arf fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src39.arf
[Sat Mar 31 09:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:30 2012] Updating source flux to 1.7e-13
[Sat Mar 31 09:30:54 2012] Flag b found in src. 39 procflags, skipping spectral fitting
[Sat Mar 31 09:30:54 2012] Source 39 has fewer than 100.000000 counts, skipping spectral fitting