[Thu Mar 29 13:06:53 2012] Detection parameters:
  Position = (299.4, 299.3) = 0 42 52.53 41 15 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.0 +/- 19.9
  Background counts = 14.6
  Rate = 0.04 +/- 0.004

[Thu Mar 29 13:06:59 2012] Off-axis axis estimate = 0.09'
[Fri Mar 30 00:08:47 2012] Using EEF radius (= 6.48 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 00:08:47 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Fri Mar 30 00:08:47 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.012
[Fri Mar 30 00:08:47 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 6.48"
[Fri Mar 30 03:53:20 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src20.ximg exists
[Fri Mar 30 03:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src20.csv
[Fri Mar 30 03:53:20 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Mar 30 03:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src20.csv
[Fri Mar 30 03:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 03:53:21 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Mar 30 03:53:22 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Mar 30 03:53:22 2012] Fit fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Mar 30 03:54:35 2012] Warning, spatial fit 20 centroid is now closest to src. 4
[Fri Mar 30 03:54:36 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:36 2012] Assessing source extent using major
[Fri Mar 30 03:54:36 2012] Source does appear to be extended
[Fri Mar 30 03:54:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 12:46:56 2012] Using EEF radius (= 6.48 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 12:46:56 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Fri Mar 30 12:46:56 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.012
[Fri Mar 30 12:46:56 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 6.48"
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src20.ximg exists
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Mar 30 16:38:52 2012] Fit fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri Mar 30 16:38:53 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Mar 30 16:38:53 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Mar 30 16:38:53 2012] Fit fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Mar 30 16:40:02 2012] Source 20 is offset by 6.292062 and -5.622012 pixels which is larger than
2 X fitted extent = 1.689439 x 2.059384, not incorporating fit results
[Fri Mar 30 16:40:02 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:40:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:40:02 2012] Assessing source extent using major
[Fri Mar 30 16:40:02 2012] Source does appear to be extended
[Fri Mar 30 16:40:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 06:33:45 2012] XMMSAS src. selection expression = ellipse(25999.015381, 25990.598938, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 06:33:45 2012] Writing source region out to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src20_src.reg
[Sat Mar 31 06:33:45 2012] Extracting stamp from image fullrun_mos2_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (262, 262) - (337, 337)
[Sat Mar 31 06:33:45 2012] XMMSAS bgd. selection expression = annulus(25999.015381, 25990.598938, 1087.500000, 2175.000000, X, Y) && !ellipse(26913.261180, 25694.554600, 493.449614, 493.449614, 0.000000, X, Y) && !ellipse(27203.004000, 26916.648000, 793.929623, 291.498408, 80.237000, X, Y) && !ellipse(28113.022000, 26451.284000, 1147.568033, 1147.568033, 0.000000, X, Y) && !ellipse(25449.449800, 26487.071600, 359.082410, 359.082410, 0.000000, X, Y) && !ellipse(23579.396000, 25883.630000, 406.939212, 406.939212, 0.000000, X, Y) && !ellipse(24332.599000, 26560.973960, 347.333610, 347.333610, 0.000000, X, Y) && !ellipse(28350.516200, 24863.284400, 433.848812, 433.848812, 0.000000, X, Y) && !ellipse(26741.640350, 26420.044617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27698.178375, 25825.814545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27605.347600, 28198.858000, 780.791222, 780.791222, 0.000000, X, Y) && !ellipse(29407.148000, 24152.358000, 1247.464036, 1247.464036, 0.000000, X, Y) && !ellipse(24601.723907, 25814.960785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23313.909912, 26457.913300, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 06:33:45 2012] Writing fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src20.gif
[Sat Mar 31 06:41:25 2012] Mean detx,y = (1240.85, -1468.28) 
[Sat Mar 31 06:41:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 06:41:43 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 06:41:44 2012] Setting source spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Mar 31 06:41:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Mar 31 08:37:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 08:37:19 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:25 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:26 2012] Error reading totcts from fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Mar 31 09:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:30 2012] Using photon index=1.80, rate=0.0426, arf fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src20.arf
[Sat Mar 31 09:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:30 2012] Updating source flux to 4.6e-13
[Sat Mar 31 09:30:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting