[Thu Mar 29 13:06:51 2012] Detection parameters:
  Position = (335.4, 305.0) = 0 42 38.62 41 16 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3108.6 +/- 65.2
  Background counts = 15.8
  Rate = 0.6 +/- 0.01

[Thu Mar 29 13:06:59 2012] Off-axis axis estimate = 2.72'
[Fri Mar 30 00:08:47 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 00:08:47 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Mar 30 00:08:47 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.953
[Fri Mar 30 00:08:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.79"
[Fri Mar 30 03:53:19 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 30 03:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src1.csv
[Fri Mar 30 03:53:19 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 30 03:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src1.csv
[Fri Mar 30 03:53:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 03:53:21 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 30 03:53:21 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 30 03:53:21 2012] Fit fullrun_mos2_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 30 03:54:35 2012] Spatial fit model total counts = 3225.000000, observed total counts = 3122.000000
[Fri Mar 30 03:54:35 2012] Offset between fit and detection position for source 2 = 0.078635 pixels
[Fri Mar 30 03:54:35 2012] 3186.440000 total counts/ 1091.880000 bgd. counts: snr = 63.387752
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.078635 pixels
  Position = (335.4, 305.1) = 0 42 38.65 41 16 4.3
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 2094.6 +/- 56.4
  Background counts = 1091.9
  Rate = 0.4 +/- 0.01
[Fri Mar 30 03:54:36 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:36 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 03:54:36 2012] Source does appear to be extended
[Fri Mar 30 03:54:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 12:46:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 12:46:56 2012] Initial guess for spatial extent in simple fitting = 5.00"
[Fri Mar 30 12:46:56 2012] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.102
[Fri Mar 30 12:46:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.00"
[Fri Mar 30 16:38:51 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 30 16:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src1.csv
[Fri Mar 30 16:38:51 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 30 16:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src1.csv
[Fri Mar 30 16:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 30 16:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar 30 16:38:52 2012] fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 30 16:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar 30 16:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 16:40:02 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Mar 30 16:40:02 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:40:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:40:02 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 16:40:02 2012] Source does appear to be extended
[Fri Mar 30 16:40:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 06:33:44 2012] Counts = 2094.560000, rescaling region sizes by 2.000000
[Sat Mar 31 06:33:44 2012] XMMSAS src. selection expression = ellipse(29128.069800, 26491.928600, 600.451217, 600.451217, 0.000000, X, Y)
[Sat Mar 31 06:33:44 2012] Writing source region out to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 31 06:33:44 2012] Extracting stamp from image fullrun_mos2_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (301, 271) - (370, 340)
[Sat Mar 31 06:33:44 2012] XMMSAS bgd. selection expression = annulus(29128.069800, 26491.928600, 2001.504058, 4003.008115, X, Y) && !ellipse(26913.261180, 25694.554600, 493.449614, 493.449614, 0.000000, X, Y) && !ellipse(27203.004000, 26916.648000, 793.929623, 291.498408, 80.237000, X, Y) && !ellipse(28113.022000, 26451.284000, 1147.568033, 1147.568033, 0.000000, X, Y) && !ellipse(25449.449800, 26487.071600, 359.082410, 359.082410, 0.000000, X, Y) && !ellipse(26009.749698, 29916.628941, 442.192680, 314.185224, 0.000000, X, Y) && !ellipse(32648.737447, 25926.377216, 395.779685, 318.058203, 101.279759, X, Y) && !ellipse(30804.463600, 26864.311400, 403.657612, 335.251210, 44.723000, X, Y) && !ellipse(33708.413330, 22110.300171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30579.778580, 23086.610600, 439.876013, 329.595209, 136.813000, X, Y) && !ellipse(32987.663147, 26416.842651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25999.015381, 25990.598938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31956.606415, 30290.846344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28350.516200, 24863.284400, 433.848812, 433.848812, 0.000000, X, Y) && !ellipse(32751.386000, 23496.484000, 249.322407, 249.322407, 0.000000, X, Y) && !ellipse(28652.169280, 23354.953200, 453.068013, 453.068013, 0.000000, X, Y) && !ellipse(26741.640350, 26420.044617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28762.266640, 29705.369000, 397.142411, 397.142411, 0.000000, X, Y) && !ellipse(32122.551056, 23621.497711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32656.039368, 24157.407410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27698.178375, 25825.814545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27605.347600, 28198.858000, 780.791222, 780.791222, 0.000000, X, Y) && !ellipse(30162.550018, 26824.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26758.425446, 29125.158386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29407.148000, 24152.358000, 1247.464036, 1247.464036, 0.000000, X, Y) && !ellipse(24601.723907, 25814.960785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25402.472778, 29529.490143, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 06:33:44 2012] Writing fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2.gif
[Sat Mar 31 06:33:49 2012] Mean detx,y = (-975.18, 791.99) 
[Sat Mar 31 06:33:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 06:34:10 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 06:34:11 2012] Setting source spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 06:34:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 31 09:26:23 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:24 2012] Error reading totcts from fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 09:26:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:28 2012] Using photon index=1.80, rate=0.372, arf fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2.arf
[Sat Mar 31 09:26:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:28 2012] Updating source flux to 3.8e-12
[Sat Mar 31 09:35:31 2012] Reading fit data from xmm0551690601/analysis//spectral/fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2_pl.csv
[Sat Mar 31 09:35:31 2012] Spectral fit parameter nH value = 1.66994e+21
[Sat Mar 31 09:35:31 2012] Spectral fit parameter PhoIndex value = 1.87038
[Sat Mar 31 09:35:31 2012] Failed to get F(0.3-8.0) from xmm0551690601/analysis//spectral/fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Mar 31 09:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:35:31 2012] Using Nh = 1.7e+21, photon index=1.87, rate=0.372, arf fullrun_mos2_xmm0551690601_pi300-10000_pass1_cl_src2.arf
[Sat Mar 31 09:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:35:31 2012] Updating source flux to 4.2e-12