[Thu Mar 29 13:06:47 2012] Detection parameters:
  Position = (370.3, 272.1) = 0 42 25.19 41 13 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.0 +/- 10.8
  Background counts = 11.2
  Rate = 0.01 +/- 0.002

[Thu Mar 29 13:06:48 2012] Off-axis axis estimate = 5.55'
[Thu Mar 29 20:42:39 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:42:39 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Mar 29 20:42:39 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Thu Mar 29 20:42:39 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 9.20"
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src46.ximg exists
[Fri Mar 30 00:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src46.csv
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src46_1.ximg exists
[Fri Mar 30 00:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src46.csv
[Fri Mar 30 00:08:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Fri Mar 30 00:08:46 2012] Fit fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Fri Mar 30 03:54:16 2012] Spatial fit model total counts = 285.016000, observed total counts = 284.000000
[Fri Mar 30 03:54:16 2012] Offset between fit and detection position for source 58 = 9.485661 pixels
[Fri Mar 30 03:54:16 2012] 317.348000 total counts/ 262.636000 bgd. counts: snr = 3.376024
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 9.485661 pixels
  Position = (362.2, 267.2) = 0 42 28.31 41 13 19.3
  Extent = 18.4 (18.4-36.8)", rotation angle = 0
  Source counts = 54.7 +/- 17.8
  Background counts = 262.6
  Rate = 0.01 +/- 0.003
[Fri Mar 30 03:54:16 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:16 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 03:54:16 2012] Source does appear to be extended
[Fri Mar 30 03:54:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 03:54:16 2012] Source is confused with source 24
[Fri Mar 30 09:10:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 09:10:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 09:10:36 2012] Initial guess for spatial extent in simple fitting = 18.40"
[Fri Mar 30 09:10:36 2012] source mask rpix=4.2, npix_max = 89, mask sum = 100, frac = 1.117
[Fri Mar 30 09:10:36 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 18.40"
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src44.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src44.csv
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src44.csv
[Fri Mar 30 12:46:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Mar 30 12:46:56 2012] Fit fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Mar 30 16:39:43 2012] Warning, spatial fit 44 centroid is now closest to src. 24
[Fri Mar 30 16:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:39:43 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 16:39:43 2012] Source does appear to be extended
[Fri Mar 30 16:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 04:14:51 2012] XMMSAS src. selection expression = ellipse(31463.800000, 23194.570000, 1104.258032, 1104.258032, 0.000000, X, Y)
[Sat Mar 31 04:14:51 2012] Writing source region out to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src58_src.reg
[Sat Mar 31 04:14:51 2012] Extracting stamp from image fullrun_mos1_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (299, 204) - (426, 331)
[Sat Mar 31 04:14:51 2012] XMMSAS bgd. selection expression = annulus(31463.800000, 23194.570000, 1840.430053, 3680.860106, X, Y) && !ellipse(29136.108800, 26499.021600, 401.912812, 401.912812, 0.000000, X, Y) && !ellipse(27486.594000, 26833.486200, 1036.632030, 1036.632030, 0.000000, X, Y) && !ellipse(27819.236000, 26625.328000, 542.751216, 542.751216, 0.000000, X, Y) && !ellipse(30811.503000, 26859.324000, 392.594411, 392.594411, 0.000000, X, Y) && !ellipse(32671.440000, 25933.132000, 277.148808, 277.148808, 0.000000, X, Y) && !ellipse(27471.110200, 19964.932600, 379.974388, 379.974388, 0.000000, X, Y) && !ellipse(28224.219330, 26241.164673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31481.042877, 19244.354019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33631.916626, 24187.199493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31450.642300, 22076.743200, 364.652810, 364.652810, 0.000000, X, Y) && !ellipse(30572.684000, 23085.763400, 487.561614, 487.561614, 0.000000, X, Y) && !ellipse(33712.988000, 22104.874000, 470.369614, 253.250407, 307.057000, X, Y) && !ellipse(28660.485779, 23370.395660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32994.273440, 26443.352800, 264.108808, 264.108808, 0.000000, X, Y) && !ellipse(28369.800800, 24857.326200, 662.316019, 279.159208, 52.360000, X, Y) && !ellipse(27723.830840, 21184.645000, 352.120810, 352.120810, 0.000000, X, Y) && !ellipse(30162.754456, 26973.724426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32598.705400, 24270.409000, 514.093615, 514.093615, 0.000000, X, Y) && !ellipse(27671.213898, 25621.494110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.508575, 24565.395142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34432.904449, 22350.657318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28266.990000, 27316.042000, 1253.976036, 1253.976036, 0.000000, X, Y)
[Sat Mar 31 04:14:51 2012] Writing fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src58.gif
[Sat Mar 31 04:32:00 2012] Mean detx,y = (-415.47, 4569.44) 
[Sat Mar 31 04:32:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:33:02 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:33:02 2012] Setting source spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Mar 31 04:33:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Mar 31 06:18:17 2012] Not generating rmf since there are only 54 counts
[Sat Mar 31 06:18:17 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:18 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:18 2012] Error reading totcts from fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Mar 31 09:26:22 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:22 2012] Using photon index=1.80, rate=0.00967, arf fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src58.arf
[Sat Mar 31 09:26:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:22 2012] Updating source flux to 9.7e-14
[Sat Mar 31 09:26:35 2012] Flag c found in src. 58 procflags, skipping spectral fitting
[Sat Mar 31 09:26:35 2012] Source 58 has fewer than 100.000000 counts, skipping spectral fitting