[Thu Mar 29 13:06:46 2012] Detection parameters:
  Position = (292.1, 339.2) = 0 42 55.36 41 18 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.5 +/- 9.7
  Background counts = 10.7
  Rate = 0.008 +/- 0.002

[Thu Mar 29 13:06:48 2012] Off-axis axis estimate = 2.99'
[Thu Mar 29 20:42:39 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:42:39 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu Mar 29 20:42:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Thu Mar 29 20:42:39 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.92"
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src57.ximg exists
[Fri Mar 30 00:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src57.csv
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Mar 30 00:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src57.csv
[Fri Mar 30 00:08:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Mar 30 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Mar 30 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Mar 30 00:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 03:54:16 2012] Warning, spatial fit 57 centroid is now closest to src. 51
[Fri Mar 30 03:54:16 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:16 2012] Assessing source extent using major
[Fri Mar 30 03:54:16 2012] Source does appear to be extended
[Fri Mar 30 03:54:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 09:10:36 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 09:10:36 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Fri Mar 30 09:10:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Fri Mar 30 09:10:36 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 7.92"
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src52.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src52.csv
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src52.csv
[Fri Mar 30 12:46:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri Mar 30 12:46:56 2012] Fit fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri Mar 30 16:39:43 2012] Warning, spatial fit 52 centroid is now closest to src. 14
[Fri Mar 30 16:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:39:43 2012] Assessing source extent using major
[Fri Mar 30 16:39:43 2012] Source does appear to be extended
[Fri Mar 30 16:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 04:14:51 2012] XMMSAS src. selection expression = ellipse(25361.205658, 29463.467529, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 04:14:51 2012] Writing source region out to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src49_src.reg
[Sat Mar 31 04:14:51 2012] Extracting stamp from image fullrun_mos1_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (255, 302) - (330, 377)
[Sat Mar 31 04:14:51 2012] XMMSAS bgd. selection expression = annulus(25361.205658, 29463.467529, 1087.500000, 2175.000000, X, Y) && !ellipse(27486.594000, 26833.486200, 1036.632030, 1036.632030, 0.000000, X, Y) && !ellipse(25989.486000, 29916.186000, 368.167211, 368.167211, 0.000000, X, Y) && !ellipse(24393.306763, 30417.496552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23430.594800, 28910.352300, 356.508810, 356.508810, 0.000000, X, Y) && !ellipse(26750.399292, 26478.601288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26752.560270, 29137.498902, 484.308451, 342.176519, 357.806744, X, Y) && !ellipse(27659.971000, 28280.387200, 620.634418, 620.634418, 0.000000, X, Y) && !ellipse(28266.990000, 27316.042000, 1253.976036, 1253.976036, 0.000000, X, Y)
[Sat Mar 31 04:14:51 2012] Writing fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src49.gif
[Sat Mar 31 04:35:59 2012] Mean detx,y = (1153.12, -3911.47) 
[Sat Mar 31 04:36:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:36:19 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:36:19 2012] Setting source spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Mar 31 04:36:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Mar 31 06:19:37 2012] Not generating rmf since there are only 39 counts
[Sat Mar 31 06:19:37 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:18 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:19 2012] Error reading totcts from fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Mar 31 09:26:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:23 2012] Using photon index=1.80, rate=0.00821, arf fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src49.arf
[Sat Mar 31 09:26:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:23 2012] Updating source flux to 9.6e-14
[Sat Mar 31 09:26:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting