[Thu Mar 29 13:06:44 2012] Detection parameters:
  Position = (308.0, 304.9) = 0 42 49.20 41 16 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.7 +/- 17.3
  Background counts = 14.2
  Rate = 0.03 +/- 0.003

[Thu Mar 29 13:06:48 2012] Off-axis axis estimate = 0.84'
[Thu Mar 29 20:42:39 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:42:39 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Thu Mar 29 20:42:39 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Thu Mar 29 20:42:39 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 6.85"
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src29.ximg exists
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Mar 30 00:08:45 2012] Fit fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src29 appears to have run properly
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Mar 30 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Mar 30 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Mar 30 00:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 03:54:15 2012] Warning, spatial fit 29 centroid is now closest to src. 19
[Fri Mar 30 03:54:16 2012] Source 35 is offset by -3.657410 and 6.489256 pixels which is larger than
2 X fitted extent = 1.687697 x 1.687697, not incorporating fit results
[Fri Mar 30 03:54:16 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:16 2012] Assessing source extent using major
[Fri Mar 30 03:54:16 2012] Source does appear to be extended
[Fri Mar 30 03:54:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 03:54:16 2012] Source is confused with source 5
[Fri Mar 30 09:10:36 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 09:10:36 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Fri Mar 30 09:10:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Fri Mar 30 09:10:36 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 6.85"
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src27.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src27.csv
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src27.csv
[Fri Mar 30 12:46:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Mar 30 12:46:56 2012] Fit fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Mar 30 16:39:43 2012] Source 35 is offset by -5.478192 and -5.122491 pixels which is larger than
2 X fitted extent = 3.162253 x 3.162253, not incorporating fit results
[Fri Mar 30 16:39:43 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 14.426530 pixels away
[Fri Mar 30 16:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:39:43 2012] Assessing source extent using major
[Fri Mar 30 16:39:43 2012] Source does appear to be extended
[Fri Mar 30 16:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 04:14:50 2012] XMMSAS src. selection expression = ellipse(26750.399292, 26478.601288, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 04:14:50 2012] Writing source region out to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src35_src.reg
[Sat Mar 31 04:14:50 2012] Extracting stamp from image fullrun_mos1_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (271, 267) - (346, 342)
[Sat Mar 31 04:14:50 2012] XMMSAS bgd. selection expression = annulus(26750.399292, 26478.601288, 1087.500000, 2175.000000, X, Y) && !ellipse(29136.108800, 26499.021600, 401.912812, 401.912812, 0.000000, X, Y) && !ellipse(27486.594000, 26833.486200, 1036.632030, 1036.632030, 0.000000, X, Y) && !ellipse(26920.740944, 25697.957400, 489.927214, 489.927214, 0.000000, X, Y) && !ellipse(27819.236000, 26625.328000, 542.751216, 542.751216, 0.000000, X, Y) && !ellipse(25452.375240, 26499.478092, 362.849522, 345.232265, 86.781577, X, Y) && !ellipse(28224.219330, 26241.164673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24340.146400, 26556.554240, 345.462410, 345.462410, 0.000000, X, Y) && !ellipse(28369.800800, 24857.326200, 662.316019, 279.159208, 52.360000, X, Y) && !ellipse(26752.560270, 29137.498902, 484.308451, 342.176519, 357.806744, X, Y) && !ellipse(27671.213898, 25621.494110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27659.971000, 28280.387200, 620.634418, 620.634418, 0.000000, X, Y) && !ellipse(28903.508575, 24565.395142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.875610, 25844.301514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25361.205658, 29463.467529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28266.990000, 27316.042000, 1253.976036, 1253.976036, 0.000000, X, Y)
[Sat Mar 31 04:14:50 2012] Writing fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src35.gif
[Sat Mar 31 04:25:26 2012] Mean detx,y = (-319.01, -958.86) 
[Sat Mar 31 04:25:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:25:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:25:41 2012] Setting source spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Mar 31 04:25:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat Mar 31 06:11:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 06:11:23 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:18 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:18 2012] Error reading totcts from fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Mar 31 09:26:21 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:21 2012] Using photon index=1.80, rate=0.027, arf fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src35.arf
[Sat Mar 31 09:26:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:21 2012] Updating source flux to 2.7e-13
[Sat Mar 31 09:26:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting