[Thu Mar 29 13:06:42 2012] Detection parameters:
  Position = (379.9, 304.2) = 0 42 21.48 41 16 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.2 +/- 17.0
  Background counts = 11.3
  Rate = 0.04 +/- 0.003

[Thu Mar 29 13:06:48 2012] Off-axis axis estimate = 5.92'
[Thu Mar 29 20:42:39 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:42:39 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Thu Mar 29 20:42:39 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.026
[Thu Mar 29 20:42:39 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.39"
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src25.ximg exists
[Fri Mar 30 00:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src25.csv
[Fri Mar 30 00:08:45 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Mar 30 00:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src25.csv
[Fri Mar 30 00:08:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Mar 30 00:08:46 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Mar 30 00:08:46 2012] Fit fullrun_mos1_xmm0551690601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Mar 30 03:54:15 2012] Source 17 is offset by -4.633938 and -3.324612 pixels which is larger than
2 X fitted extent = 1.062621 x 1.062621, not incorporating fit results
[Fri Mar 30 03:54:15 2012] Warning, spatial fit 25 centroid is now closest to src. 10
[Fri Mar 30 03:54:16 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 03:54:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 03:54:16 2012] Assessing source extent using major
[Fri Mar 30 03:54:16 2012] Source does appear to be extended
[Fri Mar 30 03:54:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 03:54:16 2012] Source is confused with source 10
[Fri Mar 30 09:10:36 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 09:10:36 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Fri Mar 30 09:10:36 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.026
[Fri Mar 30 09:10:36 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 9.39"
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src23.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src23.csv
[Fri Mar 30 12:46:55 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Mar 30 12:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src23.csv
[Fri Mar 30 12:46:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Mar 30 12:46:56 2012] fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Mar 30 12:46:56 2012] Fit fullrun_mos1_xmm0551690601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Mar 30 16:39:42 2012] Source 17 is offset by 3.889299 and 5.540848 pixels which is larger than
2 X fitted extent = 1.786225 x 2.148800, not incorporating fit results
[Fri Mar 30 16:39:42 2012] Spatial fit model total counts = 581.352000, observed total counts = 580.000000
[Fri Mar 30 16:39:42 2012] Offset between fit and detection position for source 17 = 0.334110 pixels
[Fri Mar 30 16:39:42 2012] 494.060900 total counts/ 403.162000 bgd. counts: snr = 4.527087
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.334110 pixels
  Position = (379.8, 304.5) = 0 42 21.51 41 16 1.6
  Extent = 3.3 (2.9-3.9)", rotation angle = 0
  Source counts = 90.9 +/- 22.2
  Background counts = 403.2
  Rate = 0.02 +/- 0.004
[Fri Mar 30 16:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:39:43 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 16:39:43 2012] Source does appear to be extended
[Fri Mar 30 16:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 04:14:50 2012] XMMSAS src. selection expression = ellipse(32994.273440, 26443.352800, 198.081606, 198.081606, 0.000000, X, Y)
[Sat Mar 31 04:14:50 2012] Writing source region out to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src17_src.reg
[Sat Mar 31 04:14:50 2012] Extracting stamp from image fullrun_mos1_xmm0551690601_pi300-10000_cl_sm2.00.img.gz, (368, 293) - (391, 316)
[Sat Mar 31 04:14:50 2012] XMMSAS bgd. selection expression = annulus(32994.273440, 26443.352800, 330.136009, 660.272019, X, Y) && !ellipse(32671.440000, 25933.132000, 277.148808, 277.148808, 0.000000, X, Y)
[Sat Mar 31 04:14:50 2012] Writing fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src17.gif
[Sat Mar 31 04:24:28 2012] Mean detx,y = (3339.61, 3889.95) 
[Sat Mar 31 04:24:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:24:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:24:41 2012] Setting source spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Mar 31 04:24:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Mar 31 06:06:51 2012] Not generating rmf since there are only 90 counts
[Sat Mar 31 06:06:51 2012] rmf not generated due to insufficient counts
[Sat Mar 31 09:26:17 2012] Updating aperture counts using extracted products
[Sat Mar 31 09:26:17 2012] Error reading totcts from fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Mar 31 09:26:21 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 09:26:21 2012] Using photon index=1.80, rate=0.0161, arf fullrun_mos1_xmm0551690601_pi300-10000_pass1_cl_src17.arf
[Sat Mar 31 09:26:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 09:26:21 2012] Updating source flux to 3e-13
[Sat Mar 31 09:26:35 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Sat Mar 31 09:26:35 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Sat Mar 31 09:26:35 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting