[Mon Jan 23 10:17:24 2012] Detection parameters:
  Position = (363.7, 287.3) = 0 42 27.62 41 14 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.8 +/- 15.8
  Background counts = 131.0
  Rate = 0.005 +/- 0.001

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 4.80'
[Mon Jan 23 10:21:30 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:30 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Mon Jan 23 10:21:30 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.899
[Mon Jan 23 10:21:30 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 8.83"
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src90.ximg exists
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src90_1.ximg exists
[Mon Jan 23 16:12:18 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src90 appears to have run properly
[Mon Jan 23 16:12:20 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Mon Jan 23 16:12:20 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Mon Jan 23 16:12:20 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Tue Jan 24 00:02:22 2012] Spatial fit model total counts = 1113.610000, observed total counts = 1116.000000
[Tue Jan 24 00:02:22 2012] Offset between fit and detection position for source 93 = 5.814270 pixels
[Tue Jan 24 00:02:22 2012] 1122.952000 total counts/ 524.510000 bgd. counts: snr = 26.130347
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 5.814270 pixels
  Position = (359.4, 283.4) = 0 42 29.28 41 14 24.7
  Extent = 17.7 (17.6-35.3)", rotation angle = 0
  Source counts = 598.4 +/- 33.5
  Background counts = 524.5
  Rate = 0.03 +/- 0.002
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:03:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 17.66"
[Tue Jan 24 00:03:17 2012] source mask rpix=4.1, npix_max = 83, mask sum = 76, frac = 0.914
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 17.66"
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src85.ximg exists
[Tue Jan 24 07:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src85.csv
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src85_1.ximg exists
[Tue Jan 24 07:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src85.csv
[Tue Jan 24 07:14:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 07:14:34 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Tue Jan 24 07:14:34 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Tue Jan 24 07:14:34 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Tue Jan 24 14:44:00 2012] Source 93 is offset by -3.386690 and 5.871103 pixels which is larger than
2 X fitted extent = 2.626750 x 8.466253, not incorporating fit results
[Tue Jan 24 14:44:00 2012] Warning, spatial fit 85 centroid is now closest to src. 91
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:45:30 2012] XMMSAS src. selection expression = ellipse(31220.774000, 24605.786000, 1059.510030, 1059.510030, 0.000000, X, Y)
[Tue Jan 24 14:45:30 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src93_src.reg
[Tue Jan 24 14:45:30 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (299, 222) - (420, 344)
[Tue Jan 24 14:45:30 2012] XMMSAS bgd. selection expression = annulus(31220.774000, 24605.786000, 1765.850051, 3531.700102, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(27173.770000, 28772.382000, 1247.728036, 1247.728036, 0.000000, X, Y) && !ellipse(34309.414920, 28112.553200, 377.724811, 377.724811, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(30213.369934, 26910.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.980000, 26642.198000, 379.442411, 379.442411, 0.000000, X, Y) && !ellipse(33019.153400, 26528.900800, 310.123209, 310.123209, 0.000000, X, Y) && !ellipse(30834.949016, 26914.348940, 457.258413, 457.258413, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(32685.061800, 25995.584400, 405.354412, 376.003211, 91.403000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(28329.873500, 24997.135600, 369.473611, 369.473611, 0.000000, X, Y) && !ellipse(28971.088000, 24648.087200, 378.136011, 378.136011, 0.000000, X, Y) && !ellipse(33635.731903, 24345.933075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32645.005066, 24199.088715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32805.782400, 23569.048000, 389.539211, 389.539211, 0.000000, X, Y) && !ellipse(28689.798400, 23435.129800, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(32534.187800, 23635.696000, 1491.568043, 1491.568043, 0.000000, X, Y) && !ellipse(30621.733600, 23175.292400, 505.398415, 446.816813, 319.699000, X, Y) && !ellipse(34459.350400, 22381.295980, 384.560811, 384.560811, 0.000000, X, Y) && !ellipse(33670.747400, 22205.362700, 455.604813, 241.531207, 301.392200, X, Y) && !ellipse(31488.729800, 22158.815200, 478.540014, 412.452012, 146.217589, X, Y) && !ellipse(27707.282140, 21285.714600, 468.580813, 288.223208, 121.894376, X, Y) && !ellipse(27971.674000, 28531.928000, 1303.144037, 1303.144037, 0.000000, X, Y) && !ellipse(27205.538000, 29201.602000, 1293.768037, 1293.768037, 0.000000, X, Y) && !ellipse(33933.520000, 28258.306000, 1631.728047, 1631.728047, 0.000000, X, Y) && !ellipse(35120.557037, 28858.981079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29684.904938, 27856.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.715790, 27056.882599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35563.984100, 25531.270905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.193756, 25023.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.136600, 24646.647600, 320.652809, 320.652809, 0.000000, X, Y) && !ellipse(26939.862183, 24408.684692, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 14:45:30 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src93.gif
[Tue Jan 24 16:55:51 2012] Mean detx,y = (4147.21, -197.94) 
[Tue Jan 24 16:55:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 16:56:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 16:56:39 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Tue Jan 24 16:56:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Wed Jan 25 11:55:22 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:22 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Wed Jan 25 11:55:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:27 2012] Using photon index=1.80, rate=0.0336, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src93.arf
[Wed Jan 25 11:55:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:27 2012] Updating source flux to 9e-14
[Wed Jan 25 12:12:00 2012] Flag b found in src. 93 procflags, skipping spectral fitting