[Mon Jan 23 10:17:24 2012] Detection parameters:
  Position = (409.3, 294.0) = 0 42 10.02 41 15 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.4 +/- 16.8
  Background counts = 68.8
  Rate = 0.008 +/- 0.001

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 8.05'
[Mon Jan 23 10:21:30 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:30 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Mon Jan 23 10:21:30 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.068
[Mon Jan 23 10:21:30 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 10.45"
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src88.ximg exists
[Mon Jan 23 16:12:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src88.csv
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src88_1.ximg exists
[Mon Jan 23 16:12:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src88.csv
[Mon Jan 23 16:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:20 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Mon Jan 23 16:12:20 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Mon Jan 23 16:12:20 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Tue Jan 24 00:02:22 2012] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 90 at 13.171952 pixels away
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:03:17 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Tue Jan 24 00:03:17 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.068
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 10.45"
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src83.ximg exists
[Tue Jan 24 07:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src83.csv
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue Jan 24 07:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src83.csv
[Tue Jan 24 07:14:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 07:14:34 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue Jan 24 07:14:34 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue Jan 24 07:14:34 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Tue Jan 24 14:44:00 2012] Source 90 is offset by 4.088277 and 8.631344 pixels which is larger than
2 X fitted extent = 1.201375 x 1.201375, not incorporating fit results
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:45:30 2012] XMMSAS src. selection expression = ellipse(35563.984100, 25531.270905, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 14:45:30 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src90_src.reg
[Tue Jan 24 14:45:30 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (372, 257) - (447, 332)
[Tue Jan 24 14:45:30 2012] XMMSAS bgd. selection expression = annulus(35563.984100, 25531.270905, 1087.500000, 2175.000000, X, Y) && !ellipse(33635.731903, 24345.933075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32645.005066, 24199.088715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32534.187800, 23635.696000, 1491.568043, 1491.568043, 0.000000, X, Y) && !ellipse(33933.520000, 28258.306000, 1631.728047, 1631.728047, 0.000000, X, Y)
[Tue Jan 24 14:45:30 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src90.gif
[Tue Jan 24 16:54:28 2012] Mean detx,y = (7222.91, -3455.50) 
[Tue Jan 24 16:54:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 16:54:52 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 16:54:52 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Tue Jan 24 16:54:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Wed Jan 25 04:53:38 2012] Not generating rmf since there are only 98 counts
[Wed Jan 25 04:53:38 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:22 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:22 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Wed Jan 25 11:55:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:27 2012] Using photon index=1.80, rate=0.00763, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src90.arf
[Wed Jan 25 11:55:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:27 2012] Updating source flux to 2.7e-14
[Wed Jan 25 12:12:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting