[Mon Jan 23 10:17:23 2012] Detection parameters:
  Position = (309.5, 334.7) = 0 42 48.52 41 18 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.7 +/- 21.2
  Background counts = 122.6
  Rate = 0.009 +/- 0.001

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 2.75'
[Mon Jan 23 10:21:30 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:30 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Mon Jan 23 10:21:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.618
[Mon Jan 23 10:21:30 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 7.80"
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src73.ximg exists
[Mon Jan 23 16:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src73.csv
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Jan 23 16:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src73.csv
[Mon Jan 23 16:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Jan 23 16:12:19 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Tue Jan 24 00:02:22 2012] Spatial fit model total counts = 1409.130000, observed total counts = 1398.000000
[Tue Jan 24 00:02:22 2012] Offset between fit and detection position for source 75 = 4.027079 pixels
[Tue Jan 24 00:02:22 2012] Warning, changing simple spatial fit ID from 73 to 71
[Tue Jan 24 00:02:22 2012] 1434.403000 total counts/ 1041.870000 bgd. counts: snr = 12.161003
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 4.027079 pixels
  Position = (313.3, 336.2) = 0 42 47.08 41 18 14.6
  Extent = 16.2 (15.3-32.3)", rotation angle = 0
  Source counts = 392.5 +/- 37.9
  Background counts = 1041.9
  Rate = 0.02 +/- 0.002
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:02:22 2012] Source is confused with source 18
[Tue Jan 24 00:03:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 16.17"
[Tue Jan 24 00:03:17 2012] source mask rpix=3.7, npix_max = 71, mask sum = 52, frac = 0.731
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 16.17"
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src69.ximg exists
[Tue Jan 24 07:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src69.csv
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src69_1.ximg exists
[Tue Jan 24 07:14:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src69.csv
[Tue Jan 24 07:14:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Tue Jan 24 07:14:33 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Tue Jan 24 14:44:00 2012] Warning, spatial fit 69 centroid is now closest to src. 9
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:45:29 2012] XMMSAS src. selection expression = ellipse(27205.538000, 29201.602000, 970.326028, 970.326028, 0.000000, X, Y)
[Tue Jan 24 14:45:29 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src75_src.reg
[Tue Jan 24 14:45:29 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (257, 280) - (369, 392)
[Tue Jan 24 14:45:29 2012] XMMSAS bgd. selection expression = annulus(27205.538000, 29201.602000, 1617.210047, 3234.420093, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(29900.569978, 31408.651810, 526.582985, 383.713786, 17.559967, X, Y) && !ellipse(30792.815600, 30865.362800, 423.887212, 349.748010, 101.477500, X, Y) && !ellipse(24412.125610, 30486.853882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.464800, 29986.253200, 374.552011, 374.552011, 0.000000, X, Y) && !ellipse(28785.253200, 29787.882800, 394.823211, 394.823211, 0.000000, X, Y) && !ellipse(27173.770000, 28772.382000, 1247.728036, 1247.728036, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(30213.369934, 26910.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.980000, 26642.198000, 379.442411, 379.442411, 0.000000, X, Y) && !ellipse(30834.949016, 26914.348940, 457.258413, 457.258413, 0.000000, X, Y) && !ellipse(26766.775513, 26496.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.422780, 26559.886400, 392.531211, 392.531211, 0.000000, X, Y) && !ellipse(24365.866800, 26611.532400, 420.012012, 420.012012, 0.000000, X, Y) && !ellipse(26198.864000, 26087.454000, 573.855217, 573.855217, 0.000000, X, Y) && !ellipse(24710.022552, 25777.394775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(23623.778580, 25811.952400, 485.864814, 485.864814, 0.000000, X, Y) && !ellipse(26933.873680, 25731.170400, 500.686414, 500.686414, 0.000000, X, Y) && !ellipse(27274.706580, 32874.838000, 537.881615, 537.881615, 0.000000, X, Y) && !ellipse(23735.125000, 32155.186676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27821.700400, 29915.286000, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(27971.674000, 28531.928000, 1303.144037, 1303.144037, 0.000000, X, Y) && !ellipse(25731.660000, 28400.326000, 1162.072033, 584.451217, 308.861000, X, Y) && !ellipse(25305.928000, 28055.606000, 1160.600033, 1160.600033, 0.000000, X, Y) && !ellipse(29684.904938, 27856.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.928000, 27432.396000, 488.101614, 488.101614, 0.000000, X, Y) && !ellipse(25057.816000, 27784.256000, 1182.408034, 1182.408034, 0.000000, X, Y) && !ellipse(29717.715790, 27056.882599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31220.774000, 24605.786000, 1412.680041, 1412.680041, 0.000000, X, Y)
[Tue Jan 24 14:45:29 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src75.gif
[Tue Jan 24 16:36:42 2012] Mean detx,y = (-1466.97, -1919.11) 
[Tue Jan 24 16:36:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 16:37:21 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 16:37:21 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Jan 24 16:37:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Wed Jan 25 11:55:21 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:21 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed Jan 25 11:55:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:26 2012] Using photon index=1.80, rate=0.0221, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src75.arf
[Wed Jan 25 11:55:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:27 2012] Updating source flux to 7.2e-14
[Wed Jan 25 12:12:00 2012] Flag c found in src. 75 procflags, skipping spectral fitting