[Mon Jan 23 10:17:23 2012] Detection parameters:
  Position = (328.6, 335.0) = 0 42 41.17 41 18 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.3 +/- 19.1
  Background counts = 118.3
  Rate = 0.006 +/- 0.001

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 3.43'
[Mon Jan 23 10:21:30 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:30 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Mon Jan 23 10:21:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.888
[Mon Jan 23 10:21:30 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 8.14"
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src72.ximg exists
[Mon Jan 23 16:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src72.csv
[Mon Jan 23 16:12:18 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src72_1.ximg exists
[Mon Jan 23 16:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src72.csv
[Mon Jan 23 16:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Mon Jan 23 16:12:19 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Tue Jan 24 00:02:22 2012] Source 74 is offset by -2.843567 and -8.500827 pixels which is larger than
2 X fitted extent = 2.523260 x 2.523260, not incorporating fit results
[Tue Jan 24 00:02:22 2012] Source 74 is offset by -6.940647 and 6.524438 pixels which is larger than
2 X fitted extent = 3.981609 x 3.981609, not incorporating fit results
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:03:17 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Tue Jan 24 00:03:17 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.888
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 8.14"
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src68.ximg exists
[Tue Jan 24 07:14:32 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src68_1.ximg exists
[Tue Jan 24 07:14:32 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src68 appears to have run properly
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Tue Jan 24 07:14:33 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Tue Jan 24 14:44:00 2012] Spatial fit model total counts = 2167.860000, observed total counts = 2165.000000
[Tue Jan 24 14:44:00 2012] Offset between fit and detection position for source 74 = 9.146233 pixels
[Tue Jan 24 14:44:00 2012] 2202.101000 total counts/ 1450.580000 bgd. counts: snr = 19.731962
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 9.146233 pixels
  Position = (322.1, 328.5) = 0 42 43.68 41 17 41.1
  Extent = 16.3 (16.2-32.6)", rotation angle = 0
  Source counts = 751.5 +/- 46.9
  Background counts = 1450.6
  Rate = 0.04 +/- 0.003
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:44:00 2012] Source is confused with source 18
[Tue Jan 24 14:45:29 2012] XMMSAS src. selection expression = ellipse(27971.674000, 28531.928000, 977.358028, 977.358028, 0.000000, X, Y)
[Tue Jan 24 14:45:29 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src74_src.reg
[Tue Jan 24 14:45:29 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (266, 272) - (378, 385)
[Tue Jan 24 14:45:29 2012] XMMSAS bgd. selection expression = annulus(27971.674000, 28531.928000, 1628.930047, 3257.860094, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(29900.569978, 31408.651810, 526.582985, 383.713786, 17.559967, X, Y) && !ellipse(30792.815600, 30865.362800, 423.887212, 349.748010, 101.477500, X, Y) && !ellipse(24412.125610, 30486.853882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.464800, 29986.253200, 374.552011, 374.552011, 0.000000, X, Y) && !ellipse(28785.253200, 29787.882800, 394.823211, 394.823211, 0.000000, X, Y) && !ellipse(27173.770000, 28772.382000, 1247.728036, 1247.728036, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(30213.369934, 26910.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.980000, 26642.198000, 379.442411, 379.442411, 0.000000, X, Y) && !ellipse(30834.949016, 26914.348940, 457.258413, 457.258413, 0.000000, X, Y) && !ellipse(26766.775513, 26496.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.422780, 26559.886400, 392.531211, 392.531211, 0.000000, X, Y) && !ellipse(24365.866800, 26611.532400, 420.012012, 420.012012, 0.000000, X, Y) && !ellipse(26198.864000, 26087.454000, 573.855217, 573.855217, 0.000000, X, Y) && !ellipse(24710.022552, 25777.394775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(28329.873500, 24997.135600, 369.473611, 369.473611, 0.000000, X, Y) && !ellipse(26933.873680, 25731.170400, 500.686414, 500.686414, 0.000000, X, Y) && !ellipse(27821.700400, 29915.286000, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(27205.538000, 29201.602000, 1293.768037, 1293.768037, 0.000000, X, Y) && !ellipse(25731.660000, 28400.326000, 1162.072033, 584.451217, 308.861000, X, Y) && !ellipse(25305.928000, 28055.606000, 1160.600033, 1160.600033, 0.000000, X, Y) && !ellipse(29684.904938, 27856.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.928000, 27432.396000, 488.101614, 488.101614, 0.000000, X, Y) && !ellipse(25057.816000, 27784.256000, 1182.408034, 1182.408034, 0.000000, X, Y) && !ellipse(29717.715790, 27056.882599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.193756, 25023.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31220.774000, 24605.786000, 1412.680041, 1412.680041, 0.000000, X, Y) && !ellipse(25733.629272, 24836.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.862183, 24408.684692, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 14:45:29 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src74.gif
[Tue Jan 24 16:35:54 2012] Mean detx,y = (-720.76, -1752.27) 
[Tue Jan 24 16:35:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 16:36:27 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 16:36:28 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Tue Jan 24 16:36:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Wed Jan 25 11:55:21 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:21 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed Jan 25 11:55:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:26 2012] Using photon index=1.80, rate=0.0422, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src74.arf
[Wed Jan 25 11:55:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:26 2012] Updating source flux to 1.2e-13
[Wed Jan 25 12:12:00 2012] Flag b found in src. 74 procflags, skipping spectral fitting
[Wed Jan 25 12:12:00 2012] Flag c found in src. 74 procflags, skipping spectral fitting