[Mon Jan 23 10:17:23 2012] Detection parameters:
  Position = (310.1, 296.2) = 0 42 48.29 41 15 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7585.5 +/- 106.9
  Background counts = 172.4
  Rate = 0.5 +/- 0.006

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 0.86'
[Mon Jan 23 10:21:29 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:29 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Mon Jan 23 10:21:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927
[Mon Jan 23 10:21:29 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 6.86"
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src40.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src40.csv
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src40.csv
[Mon Jan 23 16:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Jan 23 16:12:19 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Tue Jan 24 00:02:22 2012] Spatial fit model total counts = 11609.700000, observed total counts = 11603.000000
[Tue Jan 24 00:02:22 2012] Offset between fit and detection position for source 41 = 0.154443 pixels
[Tue Jan 24 00:02:22 2012] 11886.420000 total counts/ 7570.470000 bgd. counts: snr = 49.603804
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.154443 pixels
  Position = (310.1, 296.3) = 0 42 48.28 41 15 21.1
  Extent = 6.2 (6.1-6.5)", rotation angle = 0
  Source counts = 4315.9 +/- 109.0
  Background counts = 7570.5
  Rate = 0.2 +/- 0.006
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:03:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Tue Jan 24 00:03:17 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.069
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 6.24"
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src39.ximg exists
[Tue Jan 24 07:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src39.csv
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Jan 24 07:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src39.csv
[Tue Jan 24 07:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Jan 24 07:14:33 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Tue Jan 24 14:44:00 2012] Spatial fit model total counts = 11605.000000, observed total counts = 11603.000000
[Tue Jan 24 14:44:00 2012] Offset between fit and detection position for source 41 = 0.001752 pixels
[Tue Jan 24 14:44:00 2012] 11877.360000 total counts/ 7533.470000 bgd. counts: snr = 50.047373
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.001752 pixels
  Position = (310.1, 296.3) = 0 42 48.28 41 15 21.1
  Extent = 6.3 (6.1-6.5)", rotation angle = 0
  Source counts = 4343.9 +/- 109.0
  Background counts = 7533.5
  Rate = 0.2 +/- 0.006
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:45:27 2012] Counts = 4343.890000, rescaling region sizes by 2.000000
[Tue Jan 24 14:45:27 2012] XMMSAS src. selection expression = ellipse(26933.873680, 25731.170400, 751.029622, 751.029622, 0.000000, X, Y)
[Tue Jan 24 14:45:27 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src41_src.reg
[Tue Jan 24 14:45:27 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (267, 253) - (353, 339)
[Tue Jan 24 14:45:27 2012] XMMSAS bgd. selection expression = annulus(26933.873680, 25731.170400, 2503.432072, 5006.864144, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(30792.815600, 30865.362800, 423.887212, 349.748010, 101.477500, X, Y) && !ellipse(24412.125610, 30486.853882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31973.167320, 30390.272400, 447.488813, 396.784011, 212.703017, X, Y) && !ellipse(25990.464800, 29986.253200, 374.552011, 374.552011, 0.000000, X, Y) && !ellipse(28785.253200, 29787.882800, 394.823211, 394.823211, 0.000000, X, Y) && !ellipse(23453.767640, 28992.769200, 434.935213, 434.935213, 0.000000, X, Y) && !ellipse(27173.770000, 28772.382000, 1247.728036, 1247.728036, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(30213.369934, 26910.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.980000, 26642.198000, 379.442411, 379.442411, 0.000000, X, Y) && !ellipse(30834.949016, 26914.348940, 457.258413, 457.258413, 0.000000, X, Y) && !ellipse(26766.775513, 26496.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.422780, 26559.886400, 392.531211, 392.531211, 0.000000, X, Y) && !ellipse(24365.866800, 26611.532400, 420.012012, 420.012012, 0.000000, X, Y) && !ellipse(26198.864000, 26087.454000, 573.855217, 573.855217, 0.000000, X, Y) && !ellipse(24710.022552, 25777.394775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(23623.778580, 25811.952400, 485.864814, 485.864814, 0.000000, X, Y) && !ellipse(21895.706400, 25150.302800, 359.680810, 359.680810, 0.000000, X, Y) && !ellipse(28329.873500, 24997.135600, 369.473611, 369.473611, 0.000000, X, Y) && !ellipse(28971.088000, 24648.087200, 378.136011, 378.136011, 0.000000, X, Y) && !ellipse(32645.005066, 24199.088715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28689.798400, 23435.129800, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(32534.187800, 23635.696000, 1491.568043, 1491.568043, 0.000000, X, Y) && !ellipse(30621.733600, 23175.292400, 505.398415, 446.816813, 319.699000, X, Y) && !ellipse(31488.729800, 22158.815200, 478.540014, 412.452012, 146.217589, X, Y) && !ellipse(27707.282140, 21285.714600, 468.580813, 288.223208, 121.894376, X, Y) && !ellipse(24795.709800, 20587.404200, 431.455212, 431.455212, 0.000000, X, Y) && !ellipse(22828.758160, 30387.341640, 550.268016, 550.268016, 0.000000, X, Y) && !ellipse(27821.700400, 29915.286000, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(27971.674000, 28531.928000, 1303.144037, 1303.144037, 0.000000, X, Y) && !ellipse(27205.538000, 29201.602000, 1293.768037, 1293.768037, 0.000000, X, Y) && !ellipse(25731.660000, 28400.326000, 1162.072033, 584.451217, 308.861000, X, Y) && !ellipse(25305.928000, 28055.606000, 1160.600033, 1160.600033, 0.000000, X, Y) && !ellipse(29684.904938, 27856.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.928000, 27432.396000, 488.101614, 488.101614, 0.000000, X, Y) && !ellipse(25057.816000, 27784.256000, 1182.408034, 1182.408034, 0.000000, X, Y) && !ellipse(29717.715790, 27056.882599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.193756, 25023.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31220.774000, 24605.786000, 1412.680041, 1412.680041, 0.000000, X, Y) && !ellipse(29528.136600, 24646.647600, 320.652809, 320.652809, 0.000000, X, Y) && !ellipse(25733.629272, 24836.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.862183, 24408.684692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24098.704200, 23888.859800, 360.733610, 360.733610, 0.000000, X, Y) && !ellipse(26190.877000, 22920.686000, 444.543213, 420.930412, 355.650022, X, Y)
[Tue Jan 24 14:45:27 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src41.gif
[Tue Jan 24 15:58:49 2012] Mean detx,y = (-122.75, 1012.74) 
[Tue Jan 24 15:58:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 15:59:47 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 15:59:48 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Jan 24 15:59:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Jan 25 11:55:19 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:19 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Jan 25 11:55:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:25 2012] Using photon index=1.80, rate=0.244, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src41.arf
[Wed Jan 25 11:55:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:25 2012] Updating source flux to 5.8e-13