[Mon Jan 23 10:17:22 2012] Detection parameters:
  Position = (272.2, 297.1) = 0 43 2.94 41 15 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6829.4 +/- 100.2
  Background counts = 125.7
  Rate = 0.5 +/- 0.007

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 1.91'
[Mon Jan 23 10:21:29 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:29 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Mon Jan 23 10:21:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Mon Jan 23 10:21:29 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.38"
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src33.csv
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src33.csv
[Mon Jan 23 16:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jan 23 16:12:19 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Jan 24 00:02:22 2012] Spatial fit model total counts = 6786.200000, observed total counts = 6787.000000
[Tue Jan 24 00:02:22 2012] Offset between fit and detection position for source 34 = 0.118649 pixels
[Tue Jan 24 00:02:22 2012] 6855.590000 total counts/ 2297.330000 bgd. counts: snr = 95.101508
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.118649 pixels
  Position = (272.1, 297.2) = 0 43 2.96 41 15 25.1
  Extent = 6.1 (5.9-6.2)", rotation angle = 0
  Source counts = 4558.3 +/- 82.8
  Background counts = 2297.3
  Rate = 0.3 +/- 0.005
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:03:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 6.07"
[Tue Jan 24 00:03:17 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.114
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 6.07"
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src32.ximg exists
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Jan 24 07:14:31 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src32 appears to have run properly
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Jan 24 07:14:33 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Jan 24 14:44:00 2012] Spatial fit model total counts = 6792.060000, observed total counts = 6787.000000
[Tue Jan 24 14:44:00 2012] Offset between fit and detection position for source 34 = 0.002696 pixels
[Tue Jan 24 14:44:00 2012] 6861.100000 total counts/ 2300.190000 bgd. counts: snr = 95.097620
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.002696 pixels
  Position = (272.1, 297.2) = 0 43 2.96 41 15 25.1
  Extent = 6.1 (5.9-6.2)", rotation angle = 0
  Source counts = 4560.9 +/- 82.8
  Background counts = 2300.2
  Rate = 0.3 +/- 0.005
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:45:26 2012] Counts = 4560.910000, rescaling region sizes by 2.000000
[Tue Jan 24 14:45:26 2012] XMMSAS src. selection expression = ellipse(23623.778580, 25811.952400, 728.797221, 728.797221, 0.000000, X, Y)
[Tue Jan 24 14:45:26 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src34_src.reg
[Tue Jan 24 14:45:26 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (230, 255) - (314, 339)
[Tue Jan 24 14:45:26 2012] XMMSAS bgd. selection expression = annulus(23623.778580, 25811.952400, 2429.324070, 4858.648140, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(24412.125610, 30486.853882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.464800, 29986.253200, 374.552011, 374.552011, 0.000000, X, Y) && !ellipse(28785.253200, 29787.882800, 394.823211, 394.823211, 0.000000, X, Y) && !ellipse(23453.767640, 28992.769200, 434.935213, 434.935213, 0.000000, X, Y) && !ellipse(27173.770000, 28772.382000, 1247.728036, 1247.728036, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(27893.980000, 26642.198000, 379.442411, 379.442411, 0.000000, X, Y) && !ellipse(26766.775513, 26496.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.422780, 26559.886400, 392.531211, 392.531211, 0.000000, X, Y) && !ellipse(24365.866800, 26611.532400, 420.012012, 420.012012, 0.000000, X, Y) && !ellipse(26198.864000, 26087.454000, 573.855217, 573.855217, 0.000000, X, Y) && !ellipse(24710.022552, 25777.394775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(21895.706400, 25150.302800, 359.680810, 359.680810, 0.000000, X, Y) && !ellipse(28329.873500, 24997.135600, 369.473611, 369.473611, 0.000000, X, Y) && !ellipse(26933.873680, 25731.170400, 500.686414, 500.686414, 0.000000, X, Y) && !ellipse(28689.798400, 23435.129800, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(27707.282140, 21285.714600, 468.580813, 288.223208, 121.894376, X, Y) && !ellipse(24795.709800, 20587.404200, 431.455212, 431.455212, 0.000000, X, Y) && !ellipse(22828.758160, 30387.341640, 550.268016, 550.268016, 0.000000, X, Y) && !ellipse(27821.700400, 29915.286000, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(27971.674000, 28531.928000, 1303.144037, 1303.144037, 0.000000, X, Y) && !ellipse(27205.538000, 29201.602000, 1293.768037, 1293.768037, 0.000000, X, Y) && !ellipse(19596.707000, 28740.963000, 446.140013, 303.563209, 109.625000, X, Y) && !ellipse(25731.660000, 28400.326000, 1162.072033, 584.451217, 308.861000, X, Y) && !ellipse(25305.928000, 28055.606000, 1160.600033, 1160.600033, 0.000000, X, Y) && !ellipse(18744.291199, 28242.480621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.928000, 27432.396000, 488.101614, 488.101614, 0.000000, X, Y) && !ellipse(25057.816000, 27784.256000, 1182.408034, 1182.408034, 0.000000, X, Y) && !ellipse(25733.629272, 24836.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.862183, 24408.684692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24098.704200, 23888.859800, 360.733610, 360.733610, 0.000000, X, Y) && !ellipse(26190.877000, 22920.686000, 444.543213, 420.930412, 355.650022, X, Y)
[Tue Jan 24 14:45:26 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src34.gif
[Tue Jan 24 15:48:55 2012] Mean detx,y = (-2925.64, 2796.43) 
[Tue Jan 24 15:48:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 15:49:39 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 15:49:39 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jan 24 15:49:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed Jan 25 11:55:19 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:19 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Jan 25 11:55:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:25 2012] Using photon index=1.80, rate=0.256, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src34.arf
[Wed Jan 25 11:55:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:25 2012] Updating source flux to 7.9e-13