[Mon Jan 23 10:17:22 2012] Detection parameters:
  Position = (376.4, 299.2) = 0 42 22.73 41 15 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4670.5 +/- 83.7
  Background counts = 104.9
  Rate = 0.3 +/- 0.006

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 5.65'
[Mon Jan 23 10:21:29 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:29 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Mon Jan 23 10:21:29 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.905
[Mon Jan 23 10:21:29 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.25"
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src31.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src31.csv
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src31.csv
[Mon Jan 23 16:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Jan 23 16:12:19 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Jan 24 00:02:22 2012] Spatial fit model total counts = 5763.650000, observed total counts = 5755.000000
[Tue Jan 24 00:02:22 2012] Offset between fit and detection position for source 32 = 0.205844 pixels
[Tue Jan 24 00:02:22 2012] Warning, changing simple spatial fit ID from 31 to 24
[Tue Jan 24 00:02:22 2012] 5565.950000 total counts/ 3336.750000 bgd. counts: snr = 38.591104
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.205844 pixels
  Position = (376.3, 299.4) = 0 42 22.77 41 15 34.4
  Extent = 4.4 (4.2-4.6)", rotation angle = 0
  Source counts = 2229.2 +/- 74.6
  Background counts = 3336.8
  Rate = 0.1 +/- 0.004
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:03:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 4.36"
[Tue Jan 24 00:03:17 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 4.36"
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src30.ximg exists
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Jan 24 07:14:31 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src30 appears to have run properly
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Jan 24 07:14:33 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Jan 24 14:44:00 2012] Spatial fit model total counts = 6164.650000, observed total counts = 6156.000000
[Tue Jan 24 14:44:00 2012] Offset between fit and detection position for source 32 = 0.082995 pixels
[Tue Jan 24 14:44:00 2012] 6384.560000 total counts/ 3800.520000 bgd. counts: snr = 41.915796
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.082995 pixels
  Position = (376.2, 299.4) = 0 42 22.78 41 15 34.1
  Extent = 5.1 (4.9-5.3)" x 4.7 (4.5-4.9)", rotation angle = 91 (90-117) degrees
  Source counts = 2584.0 +/- 79.9
  Background counts = 3800.5
  Rate = 0.1 +/- 0.004
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Tue Jan 24 14:45:26 2012] Counts = 2584.040000, rescaling region sizes by 2.000000
[Tue Jan 24 14:45:26 2012] XMMSAS src. selection expression = ellipse(32685.061800, 25995.584400, 608.031617, 564.004816, 91.403000, X, Y)
[Tue Jan 24 14:45:26 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src32_src.reg
[Tue Jan 24 14:45:26 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (341, 264) - (411, 334)
[Tue Jan 24 14:45:26 2012] XMMSAS bgd. selection expression = annulus(32685.061800, 25995.584400, 2026.772058, 4053.544117, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(31973.167320, 30390.272400, 447.488813, 396.784011, 212.703017, X, Y) && !ellipse(28785.253200, 29787.882800, 394.823211, 394.823211, 0.000000, X, Y) && !ellipse(34903.245544, 29619.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36103.966000, 29188.592000, 344.736810, 344.736810, 0.000000, X, Y) && !ellipse(34309.414920, 28112.553200, 377.724811, 377.724811, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(30213.369934, 26910.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33019.153400, 26528.900800, 310.123209, 310.123209, 0.000000, X, Y) && !ellipse(30834.949016, 26914.348940, 457.258413, 457.258413, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(28329.873500, 24997.135600, 369.473611, 369.473611, 0.000000, X, Y) && !ellipse(28971.088000, 24648.087200, 378.136011, 378.136011, 0.000000, X, Y) && !ellipse(33635.731903, 24345.933075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32645.005066, 24199.088715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32805.782400, 23569.048000, 389.539211, 389.539211, 0.000000, X, Y) && !ellipse(28689.798400, 23435.129800, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(32534.187800, 23635.696000, 1491.568043, 1491.568043, 0.000000, X, Y) && !ellipse(30621.733600, 23175.292400, 505.398415, 446.816813, 319.699000, X, Y) && !ellipse(34459.350400, 22381.295980, 384.560811, 384.560811, 0.000000, X, Y) && !ellipse(33670.747400, 22205.362700, 455.604813, 241.531207, 301.392200, X, Y) && !ellipse(31488.729800, 22158.815200, 478.540014, 412.452012, 146.217589, X, Y) && !ellipse(27821.700400, 29915.286000, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(27971.674000, 28531.928000, 1303.144037, 1303.144037, 0.000000, X, Y) && !ellipse(33933.520000, 28258.306000, 1631.728047, 1631.728047, 0.000000, X, Y) && !ellipse(35120.557037, 28858.981079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35733.868805, 28595.880951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29684.904938, 27856.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.715790, 27056.882599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35563.984100, 25531.270905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.193756, 25023.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31220.774000, 24605.786000, 1412.680041, 1412.680041, 0.000000, X, Y) && !ellipse(29528.136600, 24646.647600, 320.652809, 320.652809, 0.000000, X, Y)
[Tue Jan 24 14:45:26 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src32.gif
[Tue Jan 24 15:42:03 2012] Mean detx,y = (4565.73, -2332.98) 
[Tue Jan 24 15:42:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 15:42:40 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 15:42:41 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Jan 24 15:42:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Jan 25 11:55:18 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:19 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jan 25 11:55:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:25 2012] Using photon index=1.80, rate=0.145, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src32.arf
[Wed Jan 25 11:55:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:25 2012] Updating source flux to 4.5e-13