[Mon Jan 23 10:17:22 2012] Detection parameters:
  Position = (293.4, 305.8) = 0 42 54.75 41 16 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5425.1 +/- 89.6
  Background counts = 150.5
  Rate = 0.4 +/- 0.006

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 0.64'
[Mon Jan 23 10:21:29 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:29 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Mon Jan 23 10:21:29 2012] source mask rpix=1.6, npix_max = 16, mask sum = 15, frac = 0.891
[Mon Jan 23 10:21:29 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 6.75"
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src27.csv
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src27.csv
[Mon Jan 23 16:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jan 23 16:12:19 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Jan 24 00:02:22 2012] Source 27 is offset by -5.831756 and 5.308375 pixels which is larger than
2 X fitted extent = 1.489375 x 1.489375, not incorporating fit results
[Tue Jan 24 00:02:22 2012] Source 27 is offset by -6.237326 and 5.364181 pixels which is larger than
2 X fitted extent = 2.027081 x 2.027081, not incorporating fit results
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:03:17 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Tue Jan 24 00:03:17 2012] source mask rpix=1.6, npix_max = 16, mask sum = 15, frac = 0.891
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 6.75"
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jan 24 07:14:31 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src26 appears to have run properly
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jan 24 07:14:33 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Jan 24 14:44:00 2012] Spatial fit model total counts = 9382.640000, observed total counts = 9467.000000
[Tue Jan 24 14:44:00 2012] Offset between fit and detection position for source 27 = 0.256563 pixels
[Tue Jan 24 14:44:00 2012] 9263.370000 total counts/ 6264.370000 bgd. counts: snr = 37.891148
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.256563 pixels
  Position = (293.1, 305.8) = 0 42 54.84 41 16 2.5
  Extent = 4.9 (4.9-4.9)", rotation angle = 0
  Source counts = 2999.0 +/- 96.2
  Background counts = 6264.4
  Rate = 0.2 +/- 0.005
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:45:25 2012] Counts = 2999.000000, rescaling region sizes by 2.000000
[Tue Jan 24 14:45:25 2012] XMMSAS src. selection expression = ellipse(25454.422780, 26559.886400, 588.796817, 588.796817, 0.000000, X, Y)
[Tue Jan 24 14:45:25 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src27_src.reg
[Tue Jan 24 14:45:25 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (259, 272) - (327, 340)
[Tue Jan 24 14:45:25 2012] XMMSAS bgd. selection expression = annulus(25454.422780, 26559.886400, 1962.656056, 3925.312113, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(24412.125610, 30486.853882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.464800, 29986.253200, 374.552011, 374.552011, 0.000000, X, Y) && !ellipse(28785.253200, 29787.882800, 394.823211, 394.823211, 0.000000, X, Y) && !ellipse(23453.767640, 28992.769200, 434.935213, 434.935213, 0.000000, X, Y) && !ellipse(27173.770000, 28772.382000, 1247.728036, 1247.728036, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(30213.369934, 26910.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.980000, 26642.198000, 379.442411, 379.442411, 0.000000, X, Y) && !ellipse(26766.775513, 26496.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24365.866800, 26611.532400, 420.012012, 420.012012, 0.000000, X, Y) && !ellipse(26198.864000, 26087.454000, 573.855217, 573.855217, 0.000000, X, Y) && !ellipse(24710.022552, 25777.394775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(23623.778580, 25811.952400, 485.864814, 485.864814, 0.000000, X, Y) && !ellipse(21895.706400, 25150.302800, 359.680810, 359.680810, 0.000000, X, Y) && !ellipse(28329.873500, 24997.135600, 369.473611, 369.473611, 0.000000, X, Y) && !ellipse(28971.088000, 24648.087200, 378.136011, 378.136011, 0.000000, X, Y) && !ellipse(26933.873680, 25731.170400, 500.686414, 500.686414, 0.000000, X, Y) && !ellipse(28689.798400, 23435.129800, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(22828.758160, 30387.341640, 550.268016, 550.268016, 0.000000, X, Y) && !ellipse(27821.700400, 29915.286000, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(27971.674000, 28531.928000, 1303.144037, 1303.144037, 0.000000, X, Y) && !ellipse(27205.538000, 29201.602000, 1293.768037, 1293.768037, 0.000000, X, Y) && !ellipse(25731.660000, 28400.326000, 1162.072033, 584.451217, 308.861000, X, Y) && !ellipse(25305.928000, 28055.606000, 1160.600033, 1160.600033, 0.000000, X, Y) && !ellipse(29684.904938, 27856.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.928000, 27432.396000, 488.101614, 488.101614, 0.000000, X, Y) && !ellipse(25057.816000, 27784.256000, 1182.408034, 1182.408034, 0.000000, X, Y) && !ellipse(29717.715790, 27056.882599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.193756, 25023.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.136600, 24646.647600, 320.652809, 320.652809, 0.000000, X, Y) && !ellipse(25733.629272, 24836.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.862183, 24408.684692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24098.704200, 23888.859800, 360.733610, 360.733610, 0.000000, X, Y) && !ellipse(26190.877000, 22920.686000, 444.543213, 420.930412, 355.650022, X, Y)
[Tue Jan 24 14:45:25 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src27.gif
[Tue Jan 24 15:31:44 2012] Mean detx,y = (-1710.35, 1179.22) 
[Tue Jan 24 15:31:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 15:32:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 15:32:31 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Jan 24 15:32:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Jan 25 11:55:18 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:18 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jan 25 11:55:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:24 2012] Using photon index=1.80, rate=0.169, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src27.arf
[Wed Jan 25 11:55:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:24 2012] Updating source flux to 5.5e-13
[Wed Jan 25 12:12:00 2012] Flag b found in src. 27 procflags, skipping spectral fitting