[Mon Jan 23 10:17:22 2012] Detection parameters:
  Position = (355.1, 310.0) = 0 42 30.94 41 16 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4575.2 +/- 83.5
  Background counts = 131.6
  Rate = 0.3 +/- 0.005

[Mon Jan 23 10:17:24 2012] Off-axis axis estimate = 4.19'
[Mon Jan 23 10:21:29 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:29 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Mon Jan 23 10:21:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.827
[Mon Jan 23 10:21:29 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.52"
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src25.csv
[Mon Jan 23 16:12:17 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jan 23 16:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src25.csv
[Mon Jan 23 16:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jan 23 16:12:19 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jan 23 16:12:19 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Jan 24 00:02:22 2012] Spatial fit model total counts = 5838.780000, observed total counts = 5839.000000
[Tue Jan 24 00:02:22 2012] Offset between fit and detection position for source 25 = 0.112228 pixels
[Tue Jan 24 00:02:22 2012] 5525.670000 total counts/ 2590.310000 bgd. counts: snr = 57.674721
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.112228 pixels
  Position = (355.0, 309.9) = 0 42 30.98 41 16 20.2
  Extent = 5.8 (5.5-5.9)", rotation angle = 0
  Source counts = 2935.4 +/- 74.3
  Background counts = 2590.3
  Rate = 0.2 +/- 0.004
[Tue Jan 24 00:02:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:22 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:22 2012] Source does appear to be extended
[Tue Jan 24 00:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:02:22 2012] Source is confused with source 22
[Tue Jan 24 00:03:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:03:17 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Tue Jan 24 00:03:17 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.201
[Tue Jan 24 00:03:17 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 5.76"
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src24.ximg exists
[Tue Jan 24 07:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src24.csv
[Tue Jan 24 07:14:31 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Jan 24 07:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src24.csv
[Tue Jan 24 07:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Jan 24 07:14:33 2012] fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Jan 24 07:14:33 2012] Fit fullrun_pn_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Jan 24 14:44:00 2012] Spatial fit model total counts = 5799.370000, observed total counts = 5791.000000
[Tue Jan 24 14:44:00 2012] Offset between fit and detection position for source 25 = 0.011010 pixels
[Tue Jan 24 14:44:00 2012] 5316.900000 total counts/ 2373.630000 bgd. counts: snr = 60.412053
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.011010 pixels
  Position = (355.0, 309.9) = 0 42 30.98 41 16 20.1
  Extent = 5.7 (5.6-5.9)", rotation angle = 0
  Source counts = 2943.3 +/- 72.9
  Background counts = 2373.6
  Rate = 0.2 +/- 0.004
[Tue Jan 24 14:44:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:00 2012] Source does appear to be extended
[Tue Jan 24 14:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:45:25 2012] Counts = 2943.270000, rescaling region sizes by 2.000000
[Tue Jan 24 14:45:25 2012] XMMSAS src. selection expression = ellipse(30834.949016, 26914.348940, 685.887620, 685.887620, 0.000000, X, Y)
[Tue Jan 24 14:45:25 2012] Writing source region out to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src25_src.reg
[Tue Jan 24 14:45:25 2012] Extracting stamp from image fullrun_pn_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (316, 270) - (394, 349)
[Tue Jan 24 14:45:25 2012] XMMSAS bgd. selection expression = annulus(30834.949016, 26914.348940, 2286.292066, 4572.584132, X, Y) && !ellipse(29154.982000, 26560.576000, 988.092028, 988.092028, 0.000000, X, Y) && !ellipse(29900.569978, 31408.651810, 526.582985, 383.713786, 17.559967, X, Y) && !ellipse(30792.815600, 30865.362800, 423.887212, 349.748010, 101.477500, X, Y) && !ellipse(31973.167320, 30390.272400, 447.488813, 396.784011, 212.703017, X, Y) && !ellipse(25990.464800, 29986.253200, 374.552011, 374.552011, 0.000000, X, Y) && !ellipse(28785.253200, 29787.882800, 394.823211, 394.823211, 0.000000, X, Y) && !ellipse(34903.245544, 29619.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27173.770000, 28772.382000, 1247.728036, 1247.728036, 0.000000, X, Y) && !ellipse(34309.414920, 28112.553200, 377.724811, 377.724811, 0.000000, X, Y) && !ellipse(27646.948600, 26893.859600, 3509.976101, 3509.976101, 0.000000, X, Y) && !ellipse(30213.369934, 26910.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.980000, 26642.198000, 379.442411, 379.442411, 0.000000, X, Y) && !ellipse(33019.153400, 26528.900800, 310.123209, 310.123209, 0.000000, X, Y) && !ellipse(26766.775513, 26496.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.864000, 26087.454000, 573.855217, 573.855217, 0.000000, X, Y) && !ellipse(28279.128000, 26329.798000, 1120.152032, 1120.152032, 0.000000, X, Y) && !ellipse(32685.061800, 25995.584400, 405.354412, 376.003211, 91.403000, X, Y) && !ellipse(28261.414000, 26324.670000, 1149.256033, 839.168024, 63.638000, X, Y) && !ellipse(28329.873500, 24997.135600, 369.473611, 369.473611, 0.000000, X, Y) && !ellipse(28971.088000, 24648.087200, 378.136011, 378.136011, 0.000000, X, Y) && !ellipse(33635.731903, 24345.933075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32645.005066, 24199.088715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.873680, 25731.170400, 500.686414, 500.686414, 0.000000, X, Y) && !ellipse(32805.782400, 23569.048000, 389.539211, 389.539211, 0.000000, X, Y) && !ellipse(28689.798400, 23435.129800, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(32534.187800, 23635.696000, 1491.568043, 1491.568043, 0.000000, X, Y) && !ellipse(30621.733600, 23175.292400, 505.398415, 446.816813, 319.699000, X, Y) && !ellipse(34459.350400, 22381.295980, 384.560811, 384.560811, 0.000000, X, Y) && !ellipse(33670.747400, 22205.362700, 455.604813, 241.531207, 301.392200, X, Y) && !ellipse(31488.729800, 22158.815200, 478.540014, 412.452012, 146.217589, X, Y) && !ellipse(35821.747620, 32260.623199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34377.621429, 31974.517242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27821.700400, 29915.286000, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(27971.674000, 28531.928000, 1303.144037, 1303.144037, 0.000000, X, Y) && !ellipse(27205.538000, 29201.602000, 1293.768037, 1293.768037, 0.000000, X, Y) && !ellipse(33933.520000, 28258.306000, 1631.728047, 1631.728047, 0.000000, X, Y) && !ellipse(35120.557037, 28858.981079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25731.660000, 28400.326000, 1162.072033, 584.451217, 308.861000, X, Y) && !ellipse(35733.868805, 28595.880951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25305.928000, 28055.606000, 1160.600033, 1160.600033, 0.000000, X, Y) && !ellipse(29684.904938, 27856.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.890015, 27791.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.928000, 27432.396000, 488.101614, 488.101614, 0.000000, X, Y) && !ellipse(29717.715790, 27056.882599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35563.984100, 25531.270905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.193756, 25023.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31220.774000, 24605.786000, 1412.680041, 1412.680041, 0.000000, X, Y) && !ellipse(29528.136600, 24646.647600, 320.652809, 320.652809, 0.000000, X, Y) && !ellipse(25733.629272, 24836.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.862183, 24408.684692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26190.877000, 22920.686000, 444.543213, 420.930412, 355.650022, X, Y)
[Tue Jan 24 14:45:25 2012] Writing fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src25.gif
[Tue Jan 24 15:27:26 2012] Mean detx,y = (2454.14, -2011.14) 
[Tue Jan 24 15:27:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 15:28:05 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 15:28:06 2012] Setting source spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jan 24 15:28:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Jan 25 11:55:18 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:18 2012] Error reading totcts from fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Jan 25 11:55:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:24 2012] Using photon index=1.80, rate=0.165, arf fullrun_pn_xmm0551690501_pi300-10000_pass1_cl_src25.arf
[Wed Jan 25 11:55:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:24 2012] Updating source flux to 4.7e-13
[Wed Jan 25 12:12:00 2012] Flag c found in src. 25 procflags, skipping spectral fitting