[Mon Jan 23 10:18:51 2012] Detection parameters:
  Position = (396.6, 258.0) = 0 42 14.96 41 12 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.6 +/- 16.8
  Background counts = 16.4
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 7.70'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.915
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 10.28"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src50.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src50.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src50_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src50.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Tue Jan 24 00:01:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Tue Jan 24 00:01:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Tue Jan 24 00:01:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:02:55 2012] Source 83 is offset by 7.591311 and 6.225236 pixels which is larger than
2 X fitted extent = 0.901246 x 0.901246, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.915
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 10.28"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src49.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src49.csv
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src49_1.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src49.csv
[Tue Jan 24 14:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Tue Jan 24 14:43:24 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Tue Jan 24 14:44:45 2012] Source 83 is offset by 3.559793 and 7.055075 pixels which is larger than
2 X fitted extent = 0.629977 x 0.629977, not incorporating fit results
[Tue Jan 24 14:44:46 2012] Warning, spatial fit 49 centroid is now closest to src. 17
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(34455.666016, 22398.827515, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src83_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (359, 221) - (434, 296)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(34455.666016, 22398.827515, 1087.500000, 2175.000000, X, Y) && !ellipse(32681.736000, 25979.458000, 1671.848048, 409.766412, 121.811961, X, Y) && !ellipse(33721.782000, 22161.642000, 398.326411, 398.326411, 0.000000, X, Y) && !ellipse(31473.847748, 22142.406113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33658.209600, 24127.122600, 397.178411, 397.178411, 0.000000, X, Y) && !ellipse(32817.442995, 23566.355094, 394.463437, 296.516775, 103.590810, X, Y) && !ellipse(32186.799403, 23697.844884, 321.476865, 277.660997, 2.342460, X, Y) && !ellipse(32890.244000, 24723.400000, 1491.384043, 1491.384043, 0.000000, X, Y) && !ellipse(35236.271179, 20298.700668, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src83.gif
[Wed Jan 25 08:51:28 2012] Mean detx,y = (-7732.70, 9.97) 
[Wed Jan 25 08:51:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:51:47 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:51:47 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Wed Jan 25 08:51:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Wed Jan 25 11:20:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 11:20:58 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:38 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:38 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src83.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 1.7e-13
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting