[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (457.8, 286.3) = 0 41 51.34 41 14 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.6 +/- 11.1
  Background counts = 10.8
  Rate = 0.003 +/- 0.0005

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 11.59'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.118
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 12.22"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src81.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src81.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src81_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src81.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:02:00 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Tue Jan 24 00:02:00 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Tue Jan 24 00:02:00 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Tue Jan 24 00:02:55 2012] Warning, spatial fit 81 centroid is now closest to src. 80
[Tue Jan 24 00:02:55 2012] Source 77 is offset by 8.698386 and 2.431191 pixels which is larger than
2 X fitted extent = 1.426552 x 1.426552, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.118
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 12.22"
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src73.ximg exists
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src73_1.ximg exists
[Tue Jan 24 14:43:22 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src73 appears to have run properly
[Tue Jan 24 14:43:25 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Tue Jan 24 14:43:25 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Tue Jan 24 14:43:25 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Tue Jan 24 14:44:46 2012] Warning, spatial fit 73 centroid is now closest to src. 80
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:30 2012] XMMSAS src. selection expression = ellipse(39778.877625, 24863.395630, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:30 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src77_src.reg
[Wed Jan 25 08:18:30 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (420, 249) - (495, 324)
[Wed Jan 25 08:18:30 2012] XMMSAS bgd. selection expression = annulus(39778.877625, 24863.395630, 1087.500000, 2175.000000, X, Y)
[Wed Jan 25 08:18:30 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src77.gif
[Wed Jan 25 08:58:11 2012] Mean detx,y = (-10902.70, 5165.79) 
[Wed Jan 25 08:58:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:58:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:58:34 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed Jan 25 08:58:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Wed Jan 25 11:54:30 2012] Not generating rmf since there are only 65 counts
[Wed Jan 25 11:54:30 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:39 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed Jan 25 11:55:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:43 2012] Using photon index=1.80, rate=0.00307, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src77.arf
[Wed Jan 25 11:55:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:43 2012] Updating source flux to 6.1e-14
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting