[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (322.6, 292.7) = 0 42 43.48 41 15 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.6 +/- 22.1
  Background counts = 50.1
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 1.80'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Mon Jan 23 20:13:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.786
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.33"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src55.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src55.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src55_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src55.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Tue Jan 24 00:02:55 2012] Spatial fit model total counts = 4640.540000, observed total counts = 4643.000000
[Tue Jan 24 00:02:55 2012] Offset between fit and detection position for source 75 = 1.671719 pixels
[Tue Jan 24 00:02:55 2012] Warning, changing simple spatial fit ID from 55 to 40
[Tue Jan 24 00:02:55 2012] 4329.674000 total counts/ 3958.810000 bgd. counts: snr = 5.894302
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 1.671719 pixels
  Position = (324.2, 292.4) = 0 42 42.84 41 15 4.1
  Extent = 14.3 (14.2-28.6)" x 8.7 (7.2-10.3)", rotation angle = 105 (93-120) degrees
  Source counts = 370.9 +/- 65.8
  Background counts = 3958.8
  Rate = 0.02 +/- 0.003
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Tue Jan 24 00:02:55 2012] Source is confused with source 30
[Tue Jan 24 10:34:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.6, npix_max = 39, mask sum = 38, frac = 0.960
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 11.51"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src54.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src54.csv
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src54.csv
[Tue Jan 24 14:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Jan 24 14:43:24 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Tue Jan 24 14:44:46 2012] Warning, spatial fit 54 centroid is now closest to src. 29
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(28161.166000, 25392.140000, 858.540025, 522.141615, 104.728300, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src75_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (275, 243) - (374, 342)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(28161.166000, 25392.140000, 1430.900041, 2861.800082, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27678.745600, 26848.057900, 1166.888034, 1166.888034, 0.000000, X, Y) && !ellipse(26928.570100, 25729.891600, 459.976013, 459.976013, 0.000000, X, Y) && !ellipse(27472.354000, 26938.112000, 997.832029, 997.832029, 0.000000, X, Y) && !ellipse(25530.930000, 26550.834000, 350.213610, 350.213610, 0.000000, X, Y) && !ellipse(32681.736000, 25979.458000, 1671.848048, 409.766412, 121.811961, X, Y) && !ellipse(30839.462120, 26920.277000, 385.967211, 385.967211, 0.000000, X, Y) && !ellipse(30607.338400, 23167.211440, 462.920813, 462.920813, 0.000000, X, Y) && !ellipse(25879.714000, 26223.286000, 700.427220, 700.427220, 0.000000, X, Y) && !ellipse(31473.847748, 22142.406113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28675.614860, 23426.522800, 391.615211, 391.615211, 0.000000, X, Y) && !ellipse(26768.437561, 26496.557251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.180000, 24980.922000, 377.356011, 377.356011, 0.000000, X, Y) && !ellipse(28467.178406, 25887.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.786000, 25908.544000, 957.640028, 957.640028, 0.000000, X, Y) && !ellipse(28943.474731, 24648.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30194.126282, 26921.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27604.612140, 28319.026000, 830.160024, 830.160024, 0.000000, X, Y) && !ellipse(24695.319000, 25887.711243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.524000, 23870.586000, 1190.072034, 1190.072034, 0.000000, X, Y) && !ellipse(26184.633789, 28316.314331, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src75.gif
[Wed Jan 25 08:52:57 2012] Mean detx,y = (-959.39, -778.82) 
[Wed Jan 25 08:52:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:53:10 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:53:10 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed Jan 25 08:53:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Wed Jan 25 11:55:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:39 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.0174, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src75.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 1.8e-13
[Wed Jan 25 12:03:28 2012] Flag c found in src. 75 procflags, skipping spectral fitting