[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (301.5, 326.0) = 0 42 51.60 41 17 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.5 +/- 14.1
  Background counts = 36.4
  Rate = 0.003 +/- 0.0007

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 2.01'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Mon Jan 23 20:13:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.024
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 7.44"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src77.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src77.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src77_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src77.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:02:00 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Tue Jan 24 00:02:00 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Tue Jan 24 00:02:00 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Tue Jan 24 00:02:55 2012] Source 70 is offset by -5.130669 and -7.804594 pixels which is larger than
2 X fitted extent = 6.836966 x 6.836966, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Jan 24 10:34:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.024
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.44"
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src70.ximg exists
[Tue Jan 24 14:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src70.csv
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src70_1.ximg exists
[Tue Jan 24 14:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src70.csv
[Tue Jan 24 14:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Tue Jan 24 14:43:24 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Tue Jan 24 14:44:46 2012] Source 70 is offset by 5.002342 and 5.869291 pixels which is larger than
2 X fitted extent = 1.537926 x 1.537926, not incorporating fit results
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(26184.633789, 28316.314331, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src70_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (264, 289) - (339, 364)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(26184.633789, 28316.314331, 1087.500000, 2175.000000, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27678.745600, 26848.057900, 1166.888034, 1166.888034, 0.000000, X, Y) && !ellipse(23621.924700, 25806.953000, 480.298414, 391.196011, 59.897300, X, Y) && !ellipse(26928.570100, 25729.891600, 459.976013, 459.976013, 0.000000, X, Y) && !ellipse(27472.354000, 26938.112000, 997.832029, 997.832029, 0.000000, X, Y) && !ellipse(25530.930000, 26550.834000, 350.213610, 350.213610, 0.000000, X, Y) && !ellipse(26012.971400, 29978.920200, 450.087213, 379.760011, 0.117606, X, Y) && !ellipse(25879.714000, 26223.286000, 700.427220, 700.427220, 0.000000, X, Y) && !ellipse(24354.481274, 26603.318865, 352.625257, 312.602796, 68.152669, X, Y) && !ellipse(24411.981160, 30477.090800, 356.799210, 356.799210, 0.000000, X, Y) && !ellipse(26768.437561, 26496.557251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28786.898600, 29780.684600, 460.483213, 354.652010, 51.337400, X, Y) && !ellipse(28467.178406, 25887.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.786000, 25908.544000, 957.640028, 957.640028, 0.000000, X, Y) && !ellipse(26753.523060, 29207.971200, 398.534411, 398.534411, 0.000000, X, Y) && !ellipse(25380.364349, 29613.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.166000, 25392.140000, 1144.720033, 696.188820, 104.728300, X, Y) && !ellipse(27604.612140, 28319.026000, 830.160024, 830.160024, 0.000000, X, Y) && !ellipse(24695.319000, 25887.711243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.682770, 26492.046356, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src70.gif
[Wed Jan 25 08:57:36 2012] Mean detx,y = (2258.66, 485.42) 
[Wed Jan 25 08:57:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:57:47 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:57:47 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Wed Jan 25 08:57:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Wed Jan 25 11:54:26 2012] Not generating rmf since there are only 66 counts
[Wed Jan 25 11:54:26 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:39 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Wed Jan 25 11:55:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:43 2012] Using photon index=1.80, rate=0.0034, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src70.arf
[Wed Jan 25 11:55:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:43 2012] Updating source flux to 3.5e-14
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting