[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (317.9, 326.9) = 0 42 45.29 41 17 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.8 +/- 21.4
  Background counts = 36.4
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 2.50'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Mon Jan 23 20:13:49 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 7.68"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src56.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src56.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src56_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src56.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Tue Jan 24 00:02:55 2012] Spatial fit model total counts = 999.185000, observed total counts = 997.000000
[Tue Jan 24 00:02:55 2012] Offset between fit and detection position for source 69 = 0.852946 pixels
[Tue Jan 24 00:02:55 2012] 980.367000 total counts/ 800.840000 bgd. counts: snr = 6.343908
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.852946 pixels
  Position = (317.9, 326.1) = 0 42 45.31 41 17 30.5
  Extent = 10.4 (7.6-15.4)", rotation angle = 0
  Source counts = 179.5 +/- 31.3
  Background counts = 800.8
  Rate = 0.008 +/- 0.001
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.081
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 10.38"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src55.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src55.csv
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src55_1.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src55.csv
[Tue Jan 24 14:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Tue Jan 24 14:43:24 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Tue Jan 24 14:44:46 2012] Warning, spatial fit 55 centroid is now closest to src. 1
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(27604.612140, 28319.026000, 622.620018, 622.620018, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src69_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (282, 290) - (354, 362)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(27604.612140, 28319.026000, 1037.700030, 2075.400060, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27678.745600, 26848.057900, 1166.888034, 1166.888034, 0.000000, X, Y) && !ellipse(27472.354000, 26938.112000, 997.832029, 997.832029, 0.000000, X, Y) && !ellipse(25530.930000, 26550.834000, 350.213610, 350.213610, 0.000000, X, Y) && !ellipse(26012.971400, 29978.920200, 450.087213, 379.760011, 0.117606, X, Y) && !ellipse(25879.714000, 26223.286000, 700.427220, 700.427220, 0.000000, X, Y) && !ellipse(26768.437561, 26496.557251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28786.898600, 29780.684600, 460.483213, 354.652010, 51.337400, X, Y) && !ellipse(28467.178406, 25887.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.786000, 25908.544000, 957.640028, 957.640028, 0.000000, X, Y) && !ellipse(30194.126282, 26921.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26753.523060, 29207.971200, 398.534411, 398.534411, 0.000000, X, Y) && !ellipse(25380.364349, 29613.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.166000, 25392.140000, 1144.720033, 696.188820, 104.728300, X, Y) && !ellipse(24695.319000, 25887.711243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26184.633789, 28316.314331, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src69.gif
[Wed Jan 25 08:53:13 2012] Mean detx,y = (1082.33, 1264.43) 
[Wed Jan 25 08:53:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:53:25 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:53:25 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jan 25 08:53:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed Jan 25 11:55:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:39 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.00841, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src69.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 8.6e-14