[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (207.7, 339.9) = 0 43 27.81 41 18 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.3 +/- 15.1
  Background counts = 13.2
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 7.23'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.141
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 10.04"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src49.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src49.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src49.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Tue Jan 24 00:02:55 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 12.638274 pixels away
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.141
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 10.04"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src48.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src48.csv
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src48_1.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src48.csv
[Tue Jan 24 14:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Tue Jan 24 14:43:24 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Tue Jan 24 14:44:46 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 12.638274 pixels away
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(18025.615921, 29520.155060, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src63_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (170, 302) - (245, 377)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(18025.615921, 29520.155060, 1087.500000, 2175.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src63.gif
[Wed Jan 25 08:51:17 2012] Mean detx,y = (9738.66, -2998.81) 
[Wed Jan 25 08:51:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:51:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:51:26 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed Jan 25 08:51:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Wed Jan 25 11:20:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 11:20:54 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:38 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:38 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.0118, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src63.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 2.2e-13
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting