[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (292.3, 340.9) = 0 42 55.17 41 18 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.6 +/- 19.8
  Background counts = 30.0
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 3.11'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Mon Jan 23 20:13:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.99"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src53.ximg exists
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue Jan 24 00:01:58 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src53 appears to have run properly
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue Jan 24 00:01:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue Jan 24 00:01:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Tue Jan 24 00:01:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:02:55 2012] Source 62 is offset by -7.463651 and -3.824238 pixels which is larger than
2 X fitted extent = 3.018906 x 1.577701, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Tue Jan 24 10:34:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 7.99"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src52.ximg exists
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src52_1.ximg exists
[Tue Jan 24 14:43:21 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src52 appears to have run properly
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Tue Jan 24 14:43:24 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Tue Jan 24 14:44:46 2012] Source 62 is offset by 7.628855 and 4.442911 pixels which is larger than
2 X fitted extent = 7.343081 x 7.343081, not incorporating fit results
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(25380.364349, 29613.803253, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src62_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (255, 303) - (330, 378)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(25380.364349, 29613.803253, 1087.500000, 2175.000000, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27678.745600, 26848.057900, 1166.888034, 1166.888034, 0.000000, X, Y) && !ellipse(27472.354000, 26938.112000, 997.832029, 997.832029, 0.000000, X, Y) && !ellipse(26012.971400, 29978.920200, 450.087213, 379.760011, 0.117606, X, Y) && !ellipse(24411.981160, 30477.090800, 356.799210, 356.799210, 0.000000, X, Y) && !ellipse(23448.864940, 28984.062200, 373.012011, 373.012011, 0.000000, X, Y) && !ellipse(22637.427032, 31669.502167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26753.523060, 29207.971200, 398.534411, 398.534411, 0.000000, X, Y) && !ellipse(27604.612140, 28319.026000, 830.160024, 830.160024, 0.000000, X, Y) && !ellipse(26184.633789, 28316.314331, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src62.gif
[Wed Jan 25 08:52:26 2012] Mean detx,y = (3591.63, 1315.46) 
[Wed Jan 25 08:52:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:52:37 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:52:37 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Jan 25 08:52:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Wed Jan 25 11:25:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 11:25:25 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:38 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:39 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.0108, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src62.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 1.2e-13
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting