[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (395.5, 368.1) = 0 42 15.32 41 20 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.7 +/- 12.5
  Background counts = 11.6
  Rate = 0.004 +/- 0.0006

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 8.66'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 10.76"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.905
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 10.76"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src70.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src70.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src70_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src70.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Tue Jan 24 00:02:55 2012] Source 60 is offset by -6.113571 and 3.184196 pixels which is larger than
2 X fitted extent = 1.384488 x 1.384488, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 14.946858 pixels away
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 10.76"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.905
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 10.76"
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src67.ximg exists
[Tue Jan 24 14:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src67.csv
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src67_1.ximg exists
[Tue Jan 24 14:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src67.csv
[Tue Jan 24 14:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Tue Jan 24 14:43:24 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Tue Jan 24 14:44:46 2012] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 13.731882 pixels away
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(34357.119293, 31977.897095, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src60_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (358, 331) - (433, 406)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(34357.119293, 31977.897095, 1087.500000, 2175.000000, X, Y) && !ellipse(31975.855780, 30374.784200, 388.032011, 388.032011, 0.000000, X, Y) && !ellipse(36110.687432, 29272.835016, 630.985398, 258.435450, 38.023095, X, Y) && !ellipse(35809.829193, 32283.445831, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src60.gif
[Wed Jan 25 08:56:45 2012] Mean detx,y = (-2491.92, 8093.51) 
[Wed Jan 25 08:56:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:57:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:57:01 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jan 25 08:57:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Jan 25 11:45:09 2012] Not generating rmf since there are only 82 counts
[Wed Jan 25 11:45:09 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:39 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jan 25 11:55:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:43 2012] Using photon index=1.80, rate=0.00387, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src60.arf
[Wed Jan 25 11:55:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:43 2012] Updating source flux to 6.5e-14
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting