[Mon Jan 23 10:18:49 2012] Detection parameters:
  Position = (293.4, 305.9) = 0 42 54.76 41 16 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2235.6 +/- 57.6
  Background counts = 42.6
  Rate = 0.1 +/- 0.003

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 0.65'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Mon Jan 23 20:13:49 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.75"
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jan 24 00:01:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src7.csv
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jan 24 00:01:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src7.csv
[Tue Jan 24 00:01:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jan 24 00:01:58 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jan 24 00:02:55 2012] Warning, spatial fit 7 centroid is now closest to src. 11
[Tue Jan 24 00:02:55 2012] Spatial fit model total counts = 4089.140000, observed total counts = 4084.000000
[Tue Jan 24 00:02:55 2012] Offset between fit and detection position for source 6 = 0.664591 pixels
[Tue Jan 24 00:02:55 2012] Warning, changing simple spatial fit ID from 7 to 13
[Tue Jan 24 00:02:55 2012] 4102.760000 total counts/ 3075.750000 bgd. counts: snr = 18.518216
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.664591 pixels
  Position = (294.0, 305.7) = 0 42 54.51 41 16 2.1
  Extent = 4.4 (4.1-4.6)", rotation angle = 0
  Source counts = 1027.0 +/- 64.1
  Background counts = 3075.8
  Rate = 0.05 +/- 0.003
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 4.38"
[Tue Jan 24 10:34:31 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.992
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.38"
[Tue Jan 24 14:43:20 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan 24 14:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 14:43:20 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan 24 14:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 14:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan 24 14:43:22 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan 24 14:44:45 2012] Warning, spatial fit 7 centroid is now closest to src. 11
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 14:44:46 2012] Source is confused with source 11
[Wed Jan 25 08:18:27 2012] Counts = 1027.010000, rescaling region sizes by 2.000000
[Wed Jan 25 08:18:27 2012] XMMSAS src. selection expression = ellipse(25530.930000, 26550.834000, 525.320415, 525.320415, 0.000000, X, Y)
[Wed Jan 25 08:18:27 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src6_src.reg
[Wed Jan 25 08:18:27 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (264, 276) - (324, 336)
[Wed Jan 25 08:18:27 2012] XMMSAS bgd. selection expression = annulus(25530.930000, 26550.834000, 1751.068050, 3502.136101, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27678.745600, 26848.057900, 1166.888034, 1166.888034, 0.000000, X, Y) && !ellipse(21885.473970, 25025.357000, 433.984012, 433.984012, 0.000000, X, Y) && !ellipse(23621.924700, 25806.953000, 480.298414, 391.196011, 59.897300, X, Y) && !ellipse(26928.570100, 25729.891600, 459.976013, 459.976013, 0.000000, X, Y) && !ellipse(27472.354000, 26938.112000, 997.832029, 997.832029, 0.000000, X, Y) && !ellipse(26012.971400, 29978.920200, 450.087213, 379.760011, 0.117606, X, Y) && !ellipse(25879.714000, 26223.286000, 700.427220, 700.427220, 0.000000, X, Y) && !ellipse(24354.481274, 26603.318865, 352.625257, 312.602796, 68.152669, X, Y) && !ellipse(23448.864940, 28984.062200, 373.012011, 373.012011, 0.000000, X, Y) && !ellipse(28675.614860, 23426.522800, 391.615211, 391.615211, 0.000000, X, Y) && !ellipse(26768.437561, 26496.557251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.180000, 24980.922000, 377.356011, 377.356011, 0.000000, X, Y) && !ellipse(28786.898600, 29780.684600, 460.483213, 354.652010, 51.337400, X, Y) && !ellipse(28467.178406, 25887.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.786000, 25908.544000, 957.640028, 957.640028, 0.000000, X, Y) && !ellipse(28943.474731, 24648.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26753.523060, 29207.971200, 398.534411, 398.534411, 0.000000, X, Y) && !ellipse(25380.364349, 29613.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22364.882200, 22671.437600, 388.383211, 388.383211, 0.000000, X, Y) && !ellipse(28161.166000, 25392.140000, 1144.720033, 696.188820, 104.728300, X, Y) && !ellipse(27604.612140, 28319.026000, 830.160024, 830.160024, 0.000000, X, Y) && !ellipse(24695.319000, 25887.711243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.524000, 23870.586000, 1190.072034, 1190.072034, 0.000000, X, Y) && !ellipse(23376.682770, 26492.046356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26184.633789, 28316.314331, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:27 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src6.gif
[Wed Jan 25 08:34:32 2012] Mean detx,y = (1870.94, -1335.20) 
[Wed Jan 25 08:34:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:34:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:34:45 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jan 25 08:34:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jan 25 11:55:36 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:36 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jan 25 11:55:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:40 2012] Using photon index=1.80, rate=0.0481, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src6.arf
[Wed Jan 25 11:55:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:40 2012] Updating source flux to 5.6e-13
[Wed Jan 25 12:03:28 2012] Flag c found in src. 6 procflags, skipping spectral fitting