[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (375.8, 279.0) = 0 42 22.95 41 14 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.6 +/- 21.2
  Background counts = 26.8
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 5.79'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 9.32"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.074
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.32"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src45.ximg exists
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Jan 24 00:01:58 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src45 appears to have run properly
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Jan 24 00:02:55 2012] Spatial fit model total counts = 1052.770000, observed total counts = 1075.000000
[Tue Jan 24 00:02:55 2012] Offset between fit and detection position for source 49 = 6.352360 pixels
[Tue Jan 24 00:02:55 2012] 762.644000 total counts/ 179.398000 bgd. counts: snr = 43.545469
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 6.352360 pixels
  Position = (378.6, 284.7) = 0 42 21.88 41 14 30.4
  Extent = 18.6 (18.6-37.3)", rotation angle = 0
  Source counts = 583.2 +/- 27.6
  Background counts = 179.4
  Rate = 0.03 +/- 0.001
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:02:55 2012] Source is confused with source 14
[Tue Jan 24 10:34:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 18.64"
[Tue Jan 24 10:34:31 2012] source mask rpix=4.3, npix_max = 91, mask sum = 90, frac = 0.982
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 18.64"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src44.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src44.csv
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src44.csv
[Tue Jan 24 14:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Jan 24 14:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue Jan 24 14:43:24 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Jan 24 14:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue Jan 24 14:43:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:44:45 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 15.088598 pixels away
[Tue Jan 24 14:44:45 2012] Source 49 is offset by 4.724690 and -4.383954 pixels which is larger than
2 X fitted extent = 4.118437 x 4.118437, not incorporating fit results
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(32890.244000, 24723.400000, 1118.538032, 1118.538032, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src49_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (314, 220) - (443, 349)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(32890.244000, 24723.400000, 1864.230054, 3728.460107, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32681.736000, 25979.458000, 1671.848048, 409.766412, 121.811961, X, Y) && !ellipse(30839.462120, 26920.277000, 385.967211, 385.967211, 0.000000, X, Y) && !ellipse(30607.338400, 23167.211440, 462.920813, 462.920813, 0.000000, X, Y) && !ellipse(33721.782000, 22161.642000, 398.326411, 398.326411, 0.000000, X, Y) && !ellipse(31473.847748, 22142.406113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33658.209600, 24127.122600, 397.178411, 397.178411, 0.000000, X, Y) && !ellipse(33004.178000, 26514.620000, 230.059207, 230.059207, 0.000000, X, Y) && !ellipse(32817.442995, 23566.355094, 394.463437, 296.516775, 103.590810, X, Y) && !ellipse(28467.178406, 25887.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32186.799403, 23697.844884, 321.476865, 277.660997, 2.342460, X, Y) && !ellipse(28943.474731, 24648.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30194.126282, 26921.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34455.666016, 22398.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35726.142670, 28590.602753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.166000, 25392.140000, 1144.720033, 696.188820, 104.728300, X, Y) && !ellipse(35236.271179, 20298.700668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35161.441833, 27469.330780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34486.443115, 28916.042969, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src49.gif
[Wed Jan 25 08:50:18 2012] Mean detx,y = (-5535.92, 1104.81) 
[Wed Jan 25 08:50:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:50:37 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:50:37 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Jan 25 08:50:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed Jan 25 11:55:38 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:38 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.0273, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src49.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 3.2e-13
[Wed Jan 25 12:03:28 2012] Flag b found in src. 49 procflags, skipping spectral fitting
[Wed Jan 25 12:03:28 2012] Flag c found in src. 49 procflags, skipping spectral fitting