[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (271.8, 379.2) = 0 43 3.09 41 21 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.2 +/- 17.3
  Background counts = 16.4
  Rate = 0.02 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 6.17'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.831
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 9.51"
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src42.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src42.csv
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Jan 24 00:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src42.csv
[Tue Jan 24 00:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Tue Jan 24 00:02:55 2012] Source 41 is offset by 2.346660 and 5.766765 pixels which is larger than
2 X fitted extent = 1.056074 x 1.056074, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Spatial fit model total counts = 334.000000, observed total counts = 334.000000
[Tue Jan 24 00:02:55 2012] Offset between fit and detection position for source 41 = 0.671568 pixels
[Tue Jan 24 00:02:55 2012] 331.069000 total counts/ 146.444000 bgd. counts: snr = 15.256493
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.671568 pixels
  Position = (271.3, 378.8) = 0 43 3.30 41 21 19.9
  Extent = 6.3 (5.6-7.1)", rotation angle = 0
  Source counts = 184.6 +/- 18.2
  Background counts = 146.4
  Rate = 0.009 +/- 0.0009
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 6.30"
[Tue Jan 24 10:34:31 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.053
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 6.30"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src41.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src41.csv
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src41_1.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src41.csv
[Tue Jan 24 14:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:23 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Tue Jan 24 14:43:23 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Tue Jan 24 14:43:23 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Tue Jan 24 14:44:45 2012] Spatial fit model total counts = 331.923000, observed total counts = 333.000000
[Tue Jan 24 14:44:45 2012] Offset between fit and detection position for source 41 = 0.037490 pixels
[Tue Jan 24 14:44:45 2012] 330.560000 total counts/ 145.177000 bgd. counts: snr = 15.385832
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.037490 pixels
  Position = (271.2, 378.8) = 0 43 3.31 41 21 19.9
  Extent = 6.3 (5.7-7.2)", rotation angle = 0
  Source counts = 185.4 +/- 18.2
  Background counts = 145.2
  Rate = 0.009 +/- 0.0009
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(23548.131520, 32907.135600, 379.458611, 379.458611, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src41_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (249, 357) - (293, 401)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(23548.131520, 32907.135600, 632.431018, 1264.862036, X, Y) && !ellipse(22637.427032, 31669.502167, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src41.gif
[Wed Jan 25 08:49:40 2012] Mean detx,y = (7027.53, 2878.28) 
[Wed Jan 25 08:49:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:49:52 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:49:52 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Jan 25 08:49:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Jan 25 11:55:38 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:38 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.00868, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src41.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 2e-13
[Wed Jan 25 12:03:28 2012] Flag b found in src. 41 procflags, skipping spectral fitting