[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (286.4, 240.4) = 0 42 57.44 41 11 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.7 +/- 63.8
  Background counts = 21.1
  Rate = 0.008 +/- 0.003

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 4.30'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.0, npix_max = 24, mask sum = 9, frac = 0.368
[Mon Jan 23 20:13:49 2012] Skipping simple spatial due to low active detector fraction
[Tue Jan 24 00:02:55 2012] Source 35 is offset by -7.731790 and -1.711435 pixels which is larger than
2 X fitted extent = 1.015338 x 1.015338, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:02:55 2012] Source is confused with source 86
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.0, npix_max = 24, mask sum = 9, frac = 0.368
[Tue Jan 24 10:34:31 2012] Skipping simple spatial due to low active detector fraction
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(24867.508270, 20867.279175, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src35_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (249, 203) - (324, 278)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(24867.508270, 20867.279175, 1087.500000, 2175.000000, X, Y) && !ellipse(23648.766200, 19565.712600, 493.336814, 493.336814, 0.000000, X, Y) && !ellipse(22364.882200, 22671.437600, 388.383211, 388.383211, 0.000000, X, Y) && !ellipse(24842.943939, 20244.368149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.524000, 23870.586000, 1190.072034, 1190.072034, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src35.gif
[Wed Jan 25 08:54:06 2012] Mean detx,y = (-798.39, -6500.89) 
[Wed Jan 25 08:54:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:54:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:54:36 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed Jan 25 08:54:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed Jan 25 11:40:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 11:40:13 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:39 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed Jan 25 11:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:42 2012] Using photon index=1.80, rate=0.00799, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src35.arf
[Wed Jan 25 11:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:42 2012] Updating source flux to 1.5e-13
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting