[Mon Jan 23 10:18:49 2012] Detection parameters:
  Position = (310.0, 296.2) = 0 42 48.35 41 15 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2733.0 +/- 64.2
  Background counts = 49.0
  Rate = 0.1 +/- 0.003

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 0.85'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Mon Jan 23 20:13:49 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 6.85"
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jan 24 00:01:57 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src5 appears to have run properly
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jan 24 00:01:58 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jan 24 00:02:55 2012] Spatial fit model total counts = 4143.070000, observed total counts = 4159.000000
[Tue Jan 24 00:02:55 2012] Offset between fit and detection position for source 3 = 0.181096 pixels
[Tue Jan 24 00:02:55 2012] 4208.980000 total counts/ 2465.620000 bgd. counts: snr = 35.109448
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.181096 pixels
  Position = (310.1, 296.3) = 0 42 48.31 41 15 21.0
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 1743.4 +/- 64.9
  Background counts = 2465.6
  Rate = 0.08 +/- 0.003
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:02:55 2012] Source is confused with source 43
[Tue Jan 24 10:34:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Tue Jan 24 10:34:31 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.190
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.80"
[Tue Jan 24 14:43:20 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jan 24 14:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src5.csv
[Tue Jan 24 14:43:20 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jan 24 14:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src5.csv
[Tue Jan 24 14:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jan 24 14:43:22 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jan 24 14:43:22 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jan 24 14:44:45 2012] Spatial fit model total counts = 4158.120000, observed total counts = 4159.000000
[Tue Jan 24 14:44:45 2012] Offset between fit and detection position for source 3 = 0.004687 pixels
[Tue Jan 24 14:44:45 2012] 4238.270000 total counts/ 2494.660000 bgd. counts: snr = 34.909503
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004687 pixels
  Position = (310.1, 296.3) = 0 42 48.31 41 15 21.0
  Extent = 5.7 (5.5-6.1)", rotation angle = 0
  Source counts = 1743.6 +/- 65.1
  Background counts = 2494.7
  Rate = 0.08 +/- 0.003
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:27 2012] Counts = 1743.610000, rescaling region sizes by 2.000000
[Wed Jan 25 08:18:27 2012] XMMSAS src. selection expression = ellipse(26928.570100, 25729.891600, 689.964020, 689.964020, 0.000000, X, Y)
[Wed Jan 25 08:18:27 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src3_src.reg
[Wed Jan 25 08:18:27 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (270, 257) - (350, 336)
[Wed Jan 25 08:18:27 2012] XMMSAS bgd. selection expression = annulus(26928.570100, 25729.891600, 2299.880066, 4599.760132, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27678.745600, 26848.057900, 1166.888034, 1166.888034, 0.000000, X, Y) && !ellipse(23621.924700, 25806.953000, 480.298414, 391.196011, 59.897300, X, Y) && !ellipse(27472.354000, 26938.112000, 997.832029, 997.832029, 0.000000, X, Y) && !ellipse(25530.930000, 26550.834000, 350.213610, 350.213610, 0.000000, X, Y) && !ellipse(26012.971400, 29978.920200, 450.087213, 379.760011, 0.117606, X, Y) && !ellipse(32681.736000, 25979.458000, 1671.848048, 409.766412, 121.811961, X, Y) && !ellipse(30839.462120, 26920.277000, 385.967211, 385.967211, 0.000000, X, Y) && !ellipse(30607.338400, 23167.211440, 462.920813, 462.920813, 0.000000, X, Y) && !ellipse(25879.714000, 26223.286000, 700.427220, 700.427220, 0.000000, X, Y) && !ellipse(31473.847748, 22142.406113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24354.481274, 26603.318865, 352.625257, 312.602796, 68.152669, X, Y) && !ellipse(24411.981160, 30477.090800, 356.799210, 356.799210, 0.000000, X, Y) && !ellipse(23448.864940, 28984.062200, 373.012011, 373.012011, 0.000000, X, Y) && !ellipse(27735.005000, 21252.165200, 438.561613, 325.436809, 23.322300, X, Y) && !ellipse(28675.614860, 23426.522800, 391.615211, 391.615211, 0.000000, X, Y) && !ellipse(26768.437561, 26496.557251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.180000, 24980.922000, 377.356011, 377.356011, 0.000000, X, Y) && !ellipse(28786.898600, 29780.684600, 460.483213, 354.652010, 51.337400, X, Y) && !ellipse(28467.178406, 25887.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.786000, 25908.544000, 957.640028, 957.640028, 0.000000, X, Y) && !ellipse(32890.244000, 24723.400000, 1491.384043, 1491.384043, 0.000000, X, Y) && !ellipse(28943.474731, 24648.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30194.126282, 26921.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26753.523060, 29207.971200, 398.534411, 398.534411, 0.000000, X, Y) && !ellipse(25380.364349, 29613.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22364.882200, 22671.437600, 388.383211, 388.383211, 0.000000, X, Y) && !ellipse(28161.166000, 25392.140000, 1144.720033, 696.188820, 104.728300, X, Y) && !ellipse(27604.612140, 28319.026000, 830.160024, 830.160024, 0.000000, X, Y) && !ellipse(24695.319000, 25887.711243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24867.508270, 20867.279175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.524000, 23870.586000, 1190.072034, 1190.072034, 0.000000, X, Y) && !ellipse(23376.682770, 26492.046356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26184.633789, 28316.314331, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:27 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src3.gif
[Wed Jan 25 08:30:43 2012] Mean detx,y = (249.75, -1168.81) 
[Wed Jan 25 08:30:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:31:03 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:31:03 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jan 25 08:31:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jan 25 11:55:36 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:36 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jan 25 11:55:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:40 2012] Using photon index=1.80, rate=0.0816, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src3.arf
[Wed Jan 25 11:55:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:40 2012] Updating source flux to 8.7e-13
[Wed Jan 25 12:03:28 2012] Flag c found in src. 3 procflags, skipping spectral fitting