[Mon Jan 23 10:18:50 2012] Detection parameters:
  Position = (327.8, 298.1) = 0 42 41.48 41 15 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 393.5 +/- 29.1
  Background counts = 48.1
  Rate = 0.02 +/- 0.001

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 2.13'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Mon Jan 23 20:13:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.49"
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src37.ximg exists
[Tue Jan 24 00:01:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src37.csv
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue Jan 24 00:01:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src37.csv
[Tue Jan 24 00:01:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Tue Jan 24 00:02:55 2012] Source 29 is offset by 1.060166 and -4.173386 pixels which is larger than
2 X fitted extent = 0.838280 x 0.838280, not incorporating fit results
[Tue Jan 24 00:02:55 2012] Warning, spatial fit 37 centroid is now closest to src. 5
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:02:55 2012] Source is confused with source 75
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Jan 24 10:34:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 7.49"
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src37.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src37.csv
[Tue Jan 24 14:43:21 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Jan 24 14:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src37.csv
[Tue Jan 24 14:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 14:43:23 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Jan 24 14:43:23 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Jan 24 14:43:23 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue Jan 24 14:44:45 2012] Warning, spatial fit 37 centroid is now closest to src. 1
[Tue Jan 24 14:44:46 2012] Source 29 is offset by -0.460064 and 1.545534 pixels which is larger than
2 X fitted extent = 1.327444 x 1.327444, not incorporating fit results
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:29 2012] XMMSAS src. selection expression = ellipse(28467.178406, 25887.971436, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src29_src.reg
[Wed Jan 25 08:18:29 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (290, 261) - (365, 336)
[Wed Jan 25 08:18:29 2012] XMMSAS bgd. selection expression = annulus(28467.178406, 25887.971436, 1087.500000, 2175.000000, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27678.745600, 26848.057900, 1166.888034, 1166.888034, 0.000000, X, Y) && !ellipse(26928.570100, 25729.891600, 459.976013, 459.976013, 0.000000, X, Y) && !ellipse(27472.354000, 26938.112000, 997.832029, 997.832029, 0.000000, X, Y) && !ellipse(30839.462120, 26920.277000, 385.967211, 385.967211, 0.000000, X, Y) && !ellipse(25879.714000, 26223.286000, 700.427220, 700.427220, 0.000000, X, Y) && !ellipse(28675.614860, 23426.522800, 391.615211, 391.615211, 0.000000, X, Y) && !ellipse(26768.437561, 26496.557251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.180000, 24980.922000, 377.356011, 377.356011, 0.000000, X, Y) && !ellipse(27437.786000, 25908.544000, 957.640028, 957.640028, 0.000000, X, Y) && !ellipse(28943.474731, 24648.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30194.126282, 26921.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.166000, 25392.140000, 1144.720033, 696.188820, 104.728300, X, Y) && !ellipse(27604.612140, 28319.026000, 830.160024, 830.160024, 0.000000, X, Y) && !ellipse(27220.524000, 23870.586000, 1190.072034, 1190.072034, 0.000000, X, Y) && !ellipse(26184.633789, 28316.314331, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:18:29 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src29.gif
[Wed Jan 25 08:48:17 2012] Mean detx,y = (-945.67, -101.80) 
[Wed Jan 25 08:48:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:48:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:48:27 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jan 25 08:48:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jan 25 10:52:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 10:52:26 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:38 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:38 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jan 25 11:55:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:41 2012] Using photon index=1.80, rate=0.0196, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src29.arf
[Wed Jan 25 11:55:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:41 2012] Updating source flux to 1.9e-13
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting