[Mon Jan 23 10:18:49 2012] Detection parameters:
  Position = (362.3, 255.1) = 0 42 28.17 41 12 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 976.8 +/- 38.6
  Background counts = 26.6
  Rate = 0.06 +/- 0.002

[Mon Jan 23 10:18:51 2012] Off-axis axis estimate = 5.60'
[Mon Jan 23 20:13:49 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:13:49 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Mon Jan 23 20:13:49 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.091
[Mon Jan 23 20:13:49 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.23"
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jan 24 00:01:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src15.csv
[Tue Jan 24 00:01:57 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jan 24 00:01:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src15.csv
[Tue Jan 24 00:01:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:01:58 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jan 24 00:01:59 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jan 24 00:01:59 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jan 24 00:02:55 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.702683 pixels away
[Tue Jan 24 00:02:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:55 2012] Assessing source extent using major
[Tue Jan 24 00:02:55 2012] Source does appear to be extended
[Tue Jan 24 00:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 10:34:31 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 10:34:31 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Tue Jan 24 10:34:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.091
[Tue Jan 24 10:34:31 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.23"
[Tue Jan 24 14:43:20 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jan 24 14:43:20 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jan 24 14:43:20 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_src15 appears to have run properly
[Tue Jan 24 14:43:23 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jan 24 14:43:23 2012] fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jan 24 14:43:23 2012] Fit fullrun_mos2_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jan 24 14:44:45 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.118739 pixels away
[Tue Jan 24 14:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:46 2012] Assessing source extent using major
[Tue Jan 24 14:44:46 2012] Source does appear to be extended
[Tue Jan 24 14:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:18:28 2012] XMMSAS src. selection expression = ellipse(31473.847748, 22142.406113, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:18:28 2012] Writing source region out to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src16_src.reg
[Wed Jan 25 08:18:28 2012] Extracting stamp from image fullrun_mos2_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (325, 218) - (400, 293)
[Wed Jan 25 08:18:28 2012] XMMSAS bgd. selection expression = annulus(31473.847748, 22142.406113, 1087.500000, 2175.000000, X, Y) && !ellipse(29164.593536, 26565.508362, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32681.736000, 25979.458000, 1671.848048, 409.766412, 121.811961, X, Y) && !ellipse(30607.338400, 23167.211440, 462.920813, 462.920813, 0.000000, X, Y) && !ellipse(33721.782000, 22161.642000, 398.326411, 398.326411, 0.000000, X, Y) && !ellipse(33658.209600, 24127.122600, 397.178411, 397.178411, 0.000000, X, Y) && !ellipse(32817.442995, 23566.355094, 394.463437, 296.516775, 103.590810, X, Y) && !ellipse(32186.799403, 23697.844884, 321.476865, 277.660997, 2.342460, X, Y) && !ellipse(32890.244000, 24723.400000, 1491.384043, 1491.384043, 0.000000, X, Y) && !ellipse(28943.474731, 24648.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34455.666016, 22398.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.166000, 25392.140000, 1144.720033, 696.188820, 104.728300, X, Y)
[Wed Jan 25 08:18:28 2012] Writing fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src16.gif
[Wed Jan 25 08:43:16 2012] Mean detx,y = (-5503.94, -1693.91) 
[Wed Jan 25 08:43:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:43:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:43:36 2012] Setting source spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jan 25 08:43:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Jan 25 09:45:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 09:45:35 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:36 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:36 2012] Error reading totcts from fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jan 25 11:55:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:40 2012] Using photon index=1.80, rate=0.0551, arf fullrun_mos2_xmm0551690501_pi300-10000_pass1_cl_src16.arf
[Wed Jan 25 11:55:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:40 2012] Updating source flux to 6.9e-13
[Wed Jan 25 12:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting