[Mon Jan 23 10:18:08 2012] Detection parameters:
  Position = (376.6, 190.6) = 0 42 22.70 41 7 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.3 +/- 11.1
  Background counts = 13.8
  Rate = 0.005 +/- 0.0009

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 9.65'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Mon Jan 23 16:12:20 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 11.26"
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src67.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src67.csv
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src67.csv
[Mon Jan 23 20:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Jan 23 20:13:49 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Tue Jan 24 00:02:38 2012] Spatial fit model total counts = 172.000000, observed total counts = 172.000000
[Tue Jan 24 00:02:38 2012] Offset between fit and detection position for source 83 = 0.294622 pixels
[Tue Jan 24 00:02:38 2012] 174.512300 total counts/ 123.420000 bgd. counts: snr = 4.598992
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.294622 pixels
  Position = (376.9, 190.5) = 0 42 22.60 41 7 40.6
  Extent = 6.5 (4.8-8.4)", rotation angle = 0
  Source counts = 51.1 +/- 13.2
  Background counts = 123.4
  Rate = 0.002 +/- 0.0006
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 6.54"
[Tue Jan 24 07:14:34 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 6.54"
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src61.ximg exists
[Tue Jan 24 10:34:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src61.csv
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src61_1.ximg exists
[Tue Jan 24 10:34:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src61.csv
[Tue Jan 24 10:34:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Tue Jan 24 14:44:22 2012] Warning, spatial fit 61 centroid is now closest to src. 82
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:38 2012] XMMSAS src. selection expression = ellipse(32740.476200, 16527.352200, 392.354042, 392.354042, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src83_src.reg
[Wed Jan 25 05:11:38 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (354, 168) - (399, 213)
[Wed Jan 25 05:11:38 2012] XMMSAS bgd. selection expression = annulus(32740.476200, 16527.352200, 653.923403, 1307.846806, X, Y)
[Wed Jan 25 05:11:38 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src83.gif
[Wed Jan 25 05:42:51 2012] Mean detx,y = (-5515.18, 9484.63) 
[Wed Jan 25 05:42:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:42:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:42:58 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Wed Jan 25 05:42:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Wed Jan 25 08:00:38 2012] Not generating rmf since there are only 51 counts
[Wed Jan 25 08:00:38 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:31 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Wed Jan 25 11:55:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:35 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src83.arf
[Wed Jan 25 11:55:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:35 2012] Updating source flux to 4.7e-14
[Wed Jan 25 11:55:47 2012] Source 83 has fewer than 100.000000 counts, skipping spectral fitting