[Mon Jan 23 10:18:08 2012] Detection parameters:
  Position = (318.4, 279.2) = 0 42 45.09 41 14 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.3 +/- 13.6
  Background counts = 51.9
  Rate = 0.003 +/- 0.0007

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 2.01'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.025
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 7.43"
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src81.ximg exists
[Mon Jan 23 20:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src81.csv
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src81_1.ximg exists
[Mon Jan 23 20:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src81.csv
[Mon Jan 23 20:13:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Mon Jan 23 20:13:49 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Tue Jan 24 00:02:38 2012] Source 77 is offset by 5.930906 and 4.215865 pixels which is larger than
2 X fitted extent = 1.448216 x 1.448216, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Tue Jan 24 07:14:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.025
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 7.43"
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src74.ximg exists
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src74_1.ximg exists
[Tue Jan 24 10:34:30 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src74 appears to have run properly
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Tue Jan 24 14:44:23 2012] Source 77 is offset by -6.422220 and -7.641399 pixels which is larger than
2 X fitted extent = 0.854520 x 0.854520, not incorporating fit results
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:38 2012] XMMSAS src. selection expression = ellipse(27653.512817, 24240.414246, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src77_src.reg
[Wed Jan 25 05:11:38 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (281, 242) - (356, 317)
[Wed Jan 25 05:11:38 2012] XMMSAS bgd. selection expression = annulus(27653.512817, 24240.414246, 1087.500000, 2175.000000, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(26938.760820, 25740.492200, 574.288817, 363.121610, 120.784400, X, Y) && !ellipse(25465.852000, 26555.448520, 334.286410, 334.286410, 0.000000, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(30611.565918, 23208.133545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.822000, 26024.822000, 1097.360032, 383.372011, 42.736000, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(28681.624600, 23436.979800, 372.974411, 372.974411, 0.000000, X, Y) && !ellipse(28311.766842, 24995.537600, 369.662411, 369.662411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24717.793823, 25871.850098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src77.gif
[Wed Jan 25 05:45:35 2012] Mean detx,y = (-1793.82, 969.45) 
[Wed Jan 25 05:45:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:45:45 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:45:45 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed Jan 25 05:45:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Wed Jan 25 08:18:19 2012] Not generating rmf since there are only 54 counts
[Wed Jan 25 08:18:19 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:32 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:32 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed Jan 25 11:55:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:35 2012] Using photon index=1.80, rate=0.00269, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src77.arf
[Wed Jan 25 11:55:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:35 2012] Updating source flux to 2.7e-14
[Wed Jan 25 11:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting