[Mon Jan 23 10:18:08 2012] Detection parameters:
  Position = (344.5, 316.4) = 0 42 35.01 41 16 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.5 +/- 16.8
  Background counts = 40.7
  Rate = 0.005 +/- 0.0009

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 3.59'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.744
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.22"
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src65.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src65.csv
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src65.csv
[Mon Jan 23 20:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon Jan 23 20:13:49 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Tue Jan 24 00:02:38 2012] Source 67 is offset by 2.367702 and 4.266292 pixels which is larger than
2 X fitted extent = 0.896547 x 0.896547, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Warning, spatial fit 65 centroid is now closest to src. 1
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Tue Jan 24 07:14:34 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.744
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 8.22"
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src59.ximg exists
[Tue Jan 24 10:34:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src59.csv
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src59_1.ximg exists
[Tue Jan 24 10:34:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src59.csv
[Tue Jan 24 10:34:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Tue Jan 24 14:44:22 2012] Warning, spatial fit 59 centroid is now closest to src. 1
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:38 2012] XMMSAS src. selection expression = ellipse(29926.486053, 27481.663391, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src67_src.reg
[Wed Jan 25 05:11:38 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (307, 279) - (382, 354)
[Wed Jan 25 05:11:38 2012] XMMSAS bgd. selection expression = annulus(29926.486053, 27481.663391, 1087.500000, 2175.000000, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(30840.028620, 26922.621200, 386.289611, 346.360810, 44.501700, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(28311.766842, 24995.537600, 369.662411, 369.662411, 0.000000, X, Y) && !ellipse(28797.179000, 29790.389200, 388.706411, 388.706411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32781.046000, 24052.090000, 2268.256065, 2268.256065, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src67.gif
[Wed Jan 25 05:42:28 2012] Mean detx,y = (1956.04, 1170.45) 
[Wed Jan 25 05:42:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:42:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:42:39 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Jan 25 05:42:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Wed Jan 25 08:00:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 08:00:36 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:31 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Jan 25 11:55:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:35 2012] Using photon index=1.80, rate=0.00538, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src67.arf
[Wed Jan 25 11:55:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:35 2012] Updating source flux to 5.5e-14
[Wed Jan 25 11:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting