[Mon Jan 23 10:18:07 2012] Detection parameters:
  Position = (509.1, 330.1) = 0 41 31.50 41 17 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.0 +/- 10.3
  Background counts = 11.4
  Rate = 0.003 +/- 0.0005

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 15.44'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Mon Jan 23 16:12:20 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.136
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 14.15"
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src82.ximg exists
[Mon Jan 23 20:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src82.csv
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src82_1.ximg exists
[Mon Jan 23 20:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src82.csv
[Mon Jan 23 20:13:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Mon Jan 23 20:13:49 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Tue Jan 24 00:02:38 2012] Warning: source 82 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 18.474353 pixels away
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Tue Jan 24 07:14:34 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.136
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 14.15"
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src75.ximg exists
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src75_1.ximg exists
[Tue Jan 24 10:34:30 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src75 appears to have run properly
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Tue Jan 24 14:44:23 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 19.078702 pixels away
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:38 2012] XMMSAS src. selection expression = ellipse(44240.457886, 28671.103241, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src62_src.reg
[Wed Jan 25 05:11:38 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (472, 293) - (547, 368)
[Wed Jan 25 05:11:38 2012] XMMSAS bgd. selection expression = annulus(44240.457886, 28671.103241, 1087.500000, 2175.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src62.gif
[Wed Jan 25 05:45:48 2012] Mean detx,y = (10892.09, 12435.50) 
[Wed Jan 25 05:45:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:46:06 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:46:06 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Jan 25 05:46:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Wed Jan 25 08:18:21 2012] Not generating rmf since there are only 53 counts
[Wed Jan 25 08:18:21 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:32 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:32 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Jan 25 11:55:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:35 2012] Using photon index=1.80, rate=0.00253, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src62.arf
[Wed Jan 25 11:55:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:35 2012] Updating source flux to 6.4e-14
[Wed Jan 25 11:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting