[Mon Jan 23 10:18:07 2012] Detection parameters:
  Position = (292.1, 340.9) = 0 42 55.24 41 18 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.4 +/- 21.7
  Background counts = 31.3
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 3.11'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.733
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.98"
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src49.csv
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src49.csv
[Mon Jan 23 20:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jan 23 20:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jan 23 20:13:49 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jan 23 20:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jan 23 20:13:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:02:38 2012] Source 57 is offset by -6.931866 and 5.957867 pixels which is larger than
2 X fitted extent = 0.881669 x 0.881669, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Source 57 is offset by -8.703751 and -2.273581 pixels which is larger than
2 X fitted extent = 3.525830 x 3.525830, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Tue Jan 24 07:14:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.733
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 7.98"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src44.ximg exists
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Jan 24 10:34:29 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src44 appears to have run properly
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Tue Jan 24 14:44:22 2012] Source 57 is offset by 7.463973 and 5.032993 pixels which is larger than
2 X fitted extent = 7.342483 x 7.342483, not incorporating fit results
[Tue Jan 24 14:44:22 2012] Source 57 is offset by -8.700418 and -2.273581 pixels which is larger than
2 X fitted extent = 3.506276 x 3.506276, not incorporating fit results
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:38 2012] XMMSAS src. selection expression = ellipse(25366.069672, 29610.192413, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src57_src.reg
[Wed Jan 25 05:11:38 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (255, 303) - (330, 378)
[Wed Jan 25 05:11:38 2012] XMMSAS bgd. selection expression = annulus(25366.069672, 29610.192413, 1087.500000, 2175.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(26022.598907, 29983.990750, 384.453624, 343.264755, 31.674060, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(24403.643920, 30474.212400, 374.425611, 374.425611, 0.000000, X, Y) && !ellipse(23462.952000, 28984.816200, 389.086411, 389.086411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(26777.812469, 29107.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src57.gif
[Wed Jan 25 05:39:16 2012] Mean detx,y = (1495.58, -3767.54) 
[Wed Jan 25 05:39:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:39:24 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:39:24 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Wed Jan 25 05:39:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Wed Jan 25 07:49:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 07:49:18 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:30 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:30 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Wed Jan 25 11:55:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:34 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src57.arf
[Wed Jan 25 11:55:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:34 2012] Updating source flux to 1.6e-13
[Wed Jan 25 11:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting