[Mon Jan 23 10:18:07 2012] Detection parameters:
  Position = (370.5, 272.9) = 0 42 25.03 41 13 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.5 +/- 23.1
  Background counts = 31.8
  Rate = 0.02 +/- 0.001

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 5.54'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Mon Jan 23 16:12:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 9.20"
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src43.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src43.csv
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src43.csv
[Mon Jan 23 20:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue Jan 24 00:02:38 2012] Warning, spatial fit 43 centroid is now closest to src. 10
[Tue Jan 24 00:02:38 2012] Spatial fit model total counts = 1068.770000, observed total counts = 1071.000000
[Tue Jan 24 00:02:38 2012] Offset between fit and detection position for source 46 = 3.809631 pixels
[Tue Jan 24 00:02:38 2012] Warning, changing simple spatial fit ID from 43 to 45
[Tue Jan 24 00:02:38 2012] 1060.214000 total counts/ 639.313000 bgd. counts: snr = 16.646510
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 3.809631 pixels
  Position = (373.9, 271.4) = 0 42 23.68 41 13 32.6
  Extent = 18.6 (18.6-37.3)", rotation angle = 0
  Source counts = 420.9 +/- 32.6
  Background counts = 639.3
  Rate = 0.02 +/- 0.002
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:02:38 2012] Source is confused with source 37
[Tue Jan 24 07:14:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 18.64"
[Tue Jan 24 07:14:34 2012] source mask rpix=4.3, npix_max = 91, mask sum = 90, frac = 0.983
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 18.64"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src40.ximg exists
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Jan 24 10:34:29 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src40 appears to have run properly
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Jan 24 14:44:22 2012] Source 46 is offset by 3.458145 and 6.938253 pixels which is larger than
2 X fitted extent = 1.061352 x 1.061352, not incorporating fit results
[Tue Jan 24 14:44:22 2012] Warning, spatial fit 40 centroid is now closest to src. 78
[Tue Jan 24 14:44:22 2012] Source 46 is offset by -3.599839 and -0.411218 pixels which is larger than
2 X fitted extent = 1.245678 x 1.245678, not incorporating fit results
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:37 2012] XMMSAS src. selection expression = ellipse(32485.060600, 23565.830000, 1118.508032, 1118.508032, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src46_src.reg
[Wed Jan 25 05:11:38 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (310, 207) - (438, 336)
[Wed Jan 25 05:11:38 2012] XMMSAS bgd. selection expression = annulus(32485.060600, 23565.830000, 1864.180054, 3728.360107, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(32683.333667, 25985.371166, 383.590957, 375.027362, 357.206060, X, Y) && !ellipse(30840.028620, 26922.621200, 386.289611, 346.360810, 44.501700, X, Y) && !ellipse(30611.565918, 23208.133545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(31480.758789, 22126.846313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33721.160560, 22165.435400, 518.948815, 518.948815, 0.000000, X, Y) && !ellipse(33641.986600, 24113.306400, 403.492812, 366.220011, 313.803542, X, Y) && !ellipse(31517.762741, 19290.274220, 641.724308, 495.040677, 325.146427, X, Y) && !ellipse(28681.624600, 23436.979800, 372.974411, 372.974411, 0.000000, X, Y) && !ellipse(32798.315600, 23569.009200, 271.715208, 271.715208, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(32781.046000, 24052.090000, 2268.256065, 2268.256065, 0.000000, X, Y) && !ellipse(35237.208405, 20282.721375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29926.486053, 27481.663391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:38 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src46.gif
[Wed Jan 25 05:27:56 2012] Mean detx,y = (394.99, 5359.78) 
[Wed Jan 25 05:27:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:28:32 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:28:32 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Jan 25 05:28:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Wed Jan 25 11:55:30 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:30 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Jan 25 11:55:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:34 2012] Using photon index=1.80, rate=0.0198, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src46.arf
[Wed Jan 25 11:55:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:34 2012] Updating source flux to 2.1e-13
[Wed Jan 25 11:55:47 2012] Flag b found in src. 46 procflags, skipping spectral fitting
[Wed Jan 25 11:55:47 2012] Flag c found in src. 46 procflags, skipping spectral fitting