[Mon Jan 23 10:18:07 2012] Detection parameters:
  Position = (324.0, 317.1) = 0 42 42.92 41 16 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 321.7 +/- 29.6
  Background counts = 44.8
  Rate = 0.02 +/- 0.002

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 2.30'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.7, npix_max = 20, mask sum = 12, frac = 0.597
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.58"
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src39.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src39.csv
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src39.csv
[Mon Jan 23 20:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Jan 24 00:02:38 2012] Warning, spatial fit 39 centroid is now closest to src. 64
[Tue Jan 24 00:02:38 2012] Spatial fit model total counts = 979.587000, observed total counts = 977.000000
[Tue Jan 24 00:02:38 2012] Offset between fit and detection position for source 45 = 4.760279 pixels
[Tue Jan 24 00:02:38 2012] Warning, changing simple spatial fit ID from 39 to 72
[Tue Jan 24 00:02:38 2012] 963.698000 total counts/ 800.802000 bgd. counts: snr = 5.756359
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 4.760279 pixels
  Position = (328.8, 316.9) = 0 42 41.09 41 16 50.6
  Extent = 16.0 (15.9-32.0)" x 8.5 (6.0-11.9)", rotation angle = 19 (359-39) degrees
  Source counts = 162.9 +/- 31.0
  Background counts = 800.8
  Rate = 0.008 +/- 0.001
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.34
[Tue Jan 24 00:02:38 2012] Source is confused with source 65
[Tue Jan 24 07:14:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Tue Jan 24 07:14:34 2012] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.909
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 12.25"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src36.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src36.csv
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src36_1.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src36.csv
[Tue Jan 24 10:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Tue Jan 24 14:44:22 2012] Warning, spatial fit 36 centroid is now closest to src. 65
[Tue Jan 24 14:44:23 2012] Spatial fit model total counts = 976.267000, observed total counts = 977.000000
[Tue Jan 24 14:44:23 2012] Offset between fit and detection position for source 45 = 1.467390 pixels
[Tue Jan 24 14:44:23 2012] Warning, changing simple spatial fit ID from 36 to 65
[Tue Jan 24 14:44:23 2012] 902.764000 total counts/ 690.527000 bgd. counts: snr = 8.076641
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.467390 pixels
  Position = (327.3, 316.6) = 0 42 41.65 41 16 49.4
  Extent = 16.0 (16.0-32.0)", rotation angle = 0
  Source counts = 212.2 +/- 30.0
  Background counts = 690.5
  Rate = 0.01 +/- 0.001
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:37 2012] XMMSAS src. selection expression = ellipse(28429.782000, 27498.792000, 961.062028, 961.062028, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src45_src.reg
[Wed Jan 25 05:11:37 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (272, 261) - (383, 372)
[Wed Jan 25 05:11:37 2012] XMMSAS bgd. selection expression = annulus(28429.782000, 27498.792000, 1601.770046, 3203.540092, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(26938.760820, 25740.492200, 574.288817, 363.121610, 120.784400, X, Y) && !ellipse(26022.598907, 29983.990750, 384.453624, 343.264755, 31.674060, X, Y) && !ellipse(25465.852000, 26555.448520, 334.286410, 334.286410, 0.000000, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(30840.028620, 26922.621200, 386.289611, 346.360810, 44.501700, X, Y) && !ellipse(26198.822000, 26024.822000, 1097.360032, 383.372011, 42.736000, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(31975.019100, 30386.412840, 363.812010, 363.812010, 0.000000, X, Y) && !ellipse(28311.766842, 24995.537600, 369.662411, 369.662411, 0.000000, X, Y) && !ellipse(28797.179000, 29790.389200, 388.706411, 388.706411, 0.000000, X, Y) && !ellipse(30830.196960, 30854.551544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29928.936646, 31412.179382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32485.060600, 23565.830000, 1491.344043, 1491.344043, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32781.046000, 24052.090000, 2268.256065, 2268.256065, 0.000000, X, Y) && !ellipse(25366.069672, 29610.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(26777.812469, 29107.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24717.793823, 25871.850098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29926.486053, 27481.663391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27653.512817, 24240.414246, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src45.gif
[Wed Jan 25 05:26:47 2012] Mean detx,y = (930.12, -53.28) 
[Wed Jan 25 05:26:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:27:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:27:00 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Jan 25 05:27:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Wed Jan 25 11:55:30 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:30 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Jan 25 11:55:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:33 2012] Using photon index=1.80, rate=0.00997, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src45.arf
[Wed Jan 25 11:55:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:33 2012] Updating source flux to 9.4e-14
[Wed Jan 25 11:55:47 2012] Flag c found in src. 45 procflags, skipping spectral fitting