[Mon Jan 23 10:18:07 2012] Detection parameters:
  Position = (354.9, 355.2) = 0 42 30.98 41 19 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.1 +/- 22.3
  Background counts = 24.2
  Rate = 0.02 +/- 0.001

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 5.81'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Mon Jan 23 16:12:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.072
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 9.33"
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src40.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src40.csv
[Mon Jan 23 20:13:47 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Jan 23 20:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src40.csv
[Mon Jan 23 20:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Tue Jan 24 00:02:38 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 11.642201 pixels away
[Tue Jan 24 00:02:38 2012] Source 44 is offset by 2.408563 and 0.726478 pixels which is larger than
2 X fitted extent = 1.064874 x 1.064874, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Tue Jan 24 07:14:34 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.072
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 9.33"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src37.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src37.csv
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src37.csv
[Tue Jan 24 10:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Jan 24 10:34:31 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Jan 24 10:34:31 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue Jan 24 14:44:22 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 11.642201 pixels away
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:37 2012] XMMSAS src. selection expression = ellipse(30830.196960, 30854.551544, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src44_src.reg
[Wed Jan 25 05:11:37 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (317, 318) - (392, 393)
[Wed Jan 25 05:11:37 2012] XMMSAS bgd. selection expression = annulus(30830.196960, 30854.551544, 1087.500000, 2175.000000, X, Y) && !ellipse(31975.019100, 30386.412840, 363.812010, 363.812010, 0.000000, X, Y) && !ellipse(28797.179000, 29790.389200, 388.706411, 388.706411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(29928.936646, 31412.179382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src44.gif
[Wed Jan 25 05:27:03 2012] Mean detx,y = (5396.95, 11.05) 
[Wed Jan 25 05:27:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:27:14 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:27:15 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Jan 25 05:27:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed Jan 25 07:37:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 07:37:47 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:30 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:30 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Jan 25 11:55:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:33 2012] Using photon index=1.80, rate=0.0168, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src44.arf
[Wed Jan 25 11:55:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:34 2012] Updating source flux to 2e-13
[Wed Jan 25 11:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting