[Mon Jan 23 10:18:06 2012] Detection parameters:
  Position = (325.2, 303.0) = 0 42 42.49 41 15 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1214.2 +/- 47.5
  Background counts = 52.5
  Rate = 0.06 +/- 0.002

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 1.97'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.41"
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src14.csv
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src14.csv
[Mon Jan 23 20:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Jan 24 00:02:38 2012] Source 15 is offset by 4.165038 and -3.846971 pixels which is larger than
2 X fitted extent = 2.540791 x 2.540791, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Tue Jan 24 07:14:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.41"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src13.csv
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src13.csv
[Tue Jan 24 10:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jan 24 10:34:30 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Jan 24 14:44:22 2012] Source 15 is offset by 4.138992 and -3.840397 pixels which is larger than
2 X fitted extent = 2.463517 x 2.463517, not incorporating fit results
[Tue Jan 24 14:44:22 2012] Spatial fit model total counts = 4082.450000, observed total counts = 4093.000000
[Tue Jan 24 14:44:22 2012] Offset between fit and detection position for source 15 = 0.437525 pixels
[Tue Jan 24 14:44:22 2012] Warning, changing simple spatial fit ID from 13 to 41
[Tue Jan 24 14:44:22 2012] 3659.522000 total counts/ 2918.230000 bgd. counts: snr = 13.722384
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.437525 pixels
  Position = (325.6, 303.1) = 0 42 42.32 41 15 50.4
  Extent = 11.0 (9.0-13.1)", rotation angle = 0
  Source counts = 741.3 +/- 60.5
  Background counts = 2918.2
  Rate = 0.03 +/- 0.003
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:37 2012] XMMSAS src. selection expression = ellipse(28278.618000, 26317.444000, 661.488019, 661.488019, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src15_src.reg
[Wed Jan 25 05:11:37 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (288, 265) - (364, 341)
[Wed Jan 25 05:11:37 2012] XMMSAS bgd. selection expression = annulus(28278.618000, 26317.444000, 1102.480032, 2204.960063, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(26938.760820, 25740.492200, 574.288817, 363.121610, 120.784400, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(30840.028620, 26922.621200, 386.289611, 346.360810, 44.501700, X, Y) && !ellipse(26198.822000, 26024.822000, 1097.360032, 383.372011, 42.736000, X, Y) && !ellipse(28311.766842, 24995.537600, 369.662411, 369.662411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(26777.812469, 29107.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29926.486053, 27481.663391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27653.512817, 24240.414246, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src15.gif
[Wed Jan 25 05:21:56 2012] Mean detx,y = (278.83, 339.82) 
[Wed Jan 25 05:21:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:22:04 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:22:04 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jan 25 05:22:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jan 25 11:55:28 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:28 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jan 25 11:55:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:32 2012] Using photon index=1.80, rate=0.0348, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src15.arf
[Wed Jan 25 11:55:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:32 2012] Updating source flux to 3.4e-13
[Wed Jan 25 11:55:47 2012] Flag b found in src. 15 procflags, skipping spectral fitting