[Mon Jan 23 10:18:06 2012] Detection parameters:
  Position = (299.7, 300.7) = 0 42 52.32 41 15 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1356.6 +/- 46.0
  Background counts = 47.1
  Rate = 0.07 +/- 0.002

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 0.19'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 6.52"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 6.52"
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src12.csv
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src12.csv
[Mon Jan 23 20:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jan 24 00:02:38 2012] Source 14 is offset by 5.663504 and -5.024790 pixels which is larger than
2 X fitted extent = 2.059370 x 2.059370, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Spatial fit model total counts = 4726.000000, observed total counts = 4711.000000
[Tue Jan 24 00:02:38 2012] Offset between fit and detection position for source 14 = 2.037391 pixels
[Tue Jan 24 00:02:38 2012] Warning, changing simple spatial fit ID from 12 to 30
[Tue Jan 24 00:02:38 2012] 4892.534000 total counts/ 4259.700000 bgd. counts: snr = 9.696172
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.037391 pixels
  Position = (301.7, 300.5) = 0 42 51.54 41 15 39.4
  Extent = 7.3 (6.7-8.1)", rotation angle = 0
  Source counts = 632.8 +/- 69.9
  Background counts = 4259.7
  Rate = 0.03 +/- 0.003
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jan 24 07:14:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.31"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src12.csv
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src12.csv
[Tue Jan 24 10:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jan 24 10:34:30 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jan 24 14:44:22 2012] Source 14 is offset by 2.081430 and 0.062338 pixels which is larger than
2 X fitted extent = 1.607931 x 1.607931, not incorporating fit results
[Tue Jan 24 14:44:22 2012] Spatial fit model total counts = 4716.390000, observed total counts = 4711.000000
[Tue Jan 24 14:44:22 2012] Offset between fit and detection position for source 14 = 0.836897 pixels
[Tue Jan 24 14:44:22 2012] Warning, changing simple spatial fit ID from 12 to 28
[Tue Jan 24 14:44:22 2012] 4899.413000 total counts/ 4351.620000 bgd. counts: snr = 8.304070
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.836897 pixels
  Position = (301.7, 299.7) = 0 42 51.54 41 15 35.8
  Extent = 13.7 (13.6-27.4)" x 4.8 (4.1-5.6)", rotation angle = 43 (38-49) degrees
  Source counts = 547.8 +/- 70.0
  Background counts = 4351.6
  Rate = 0.03 +/- 0.003
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.45
[Tue Jan 24 14:44:23 2012] Source is asymmetric
[Tue Jan 24 14:44:23 2012] Source is confused with source 3
[Wed Jan 25 05:11:37 2012] XMMSAS src. selection expression = ellipse(26198.822000, 26024.822000, 823.020024, 287.529008, 42.736000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src14_src.reg
[Wed Jan 25 05:11:37 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (254, 252) - (349, 347)
[Wed Jan 25 05:11:37 2012] XMMSAS bgd. selection expression = annulus(26198.822000, 26024.822000, 1371.700039, 2743.400079, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(23623.430140, 25807.401200, 523.573615, 423.584012, 72.180000, X, Y) && !ellipse(26938.760820, 25740.492200, 574.288817, 363.121610, 120.784400, X, Y) && !ellipse(25465.852000, 26555.448520, 334.286410, 334.286410, 0.000000, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(24359.780400, 26611.151600, 364.713610, 364.713610, 0.000000, X, Y) && !ellipse(23462.952000, 28984.816200, 389.086411, 389.086411, 0.000000, X, Y) && !ellipse(28681.624600, 23436.979800, 372.974411, 372.974411, 0.000000, X, Y) && !ellipse(28311.766842, 24995.537600, 369.662411, 369.662411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.069672, 29610.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(26777.812469, 29107.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24717.793823, 25871.850098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23340.059296, 26449.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24041.865880, 23271.674200, 393.641611, 393.641611, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(27653.512817, 24240.414246, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src14.gif
[Wed Jan 25 05:21:31 2012] Mean detx,y = (-1088.87, -1244.06) 
[Wed Jan 25 05:21:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:21:41 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:21:41 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jan 25 05:21:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jan 25 11:55:28 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:28 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jan 25 11:55:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:32 2012] Using photon index=1.80, rate=0.0257, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src14.arf
[Wed Jan 25 11:55:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:32 2012] Updating source flux to 3.1e-13
[Wed Jan 25 11:55:47 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Wed Jan 25 11:55:47 2012] Flag c found in src. 14 procflags, skipping spectral fitting