[Mon Jan 23 10:18:06 2012] Detection parameters:
  Position = (299.7, 345.7) = 0 42 52.31 41 18 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2059.1 +/- 56.4
  Background counts = 28.2
  Rate = 0.1 +/- 0.003

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 3.43'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.756
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.14"
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src6.csv
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src6.csv
[Mon Jan 23 20:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Jan 24 00:02:38 2012] Spatial fit model total counts = 2170.840000, observed total counts = 2167.000000
[Tue Jan 24 00:02:38 2012] Offset between fit and detection position for source 12 = 0.461607 pixels
[Tue Jan 24 00:02:38 2012] 2121.822000 total counts/ 877.542000 bgd. counts: snr = 42.003373
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.461607 pixels
  Position = (299.7, 345.2) = 0 42 52.32 41 18 53.7
  Extent = 4.6 (4.4-4.8)", rotation angle = 0
  Source counts = 1244.3 +/- 46.1
  Background counts = 877.5
  Rate = 0.06 +/- 0.002
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 4.57"
[Tue Jan 24 07:14:34 2012] source mask rpix=1.1, npix_max = 9, mask sum = 6, frac = 0.624
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.57"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jan 24 10:34:29 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src6 appears to have run properly
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jan 24 10:34:30 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Jan 24 14:44:22 2012] Spatial fit model total counts = 2275.710000, observed total counts = 2209.000000
[Tue Jan 24 14:44:22 2012] Offset between fit and detection position for source 12 = 0.005256 pixels
[Tue Jan 24 14:44:22 2012] 2236.677000 total counts/ 937.747000 bgd. counts: snr = 42.417289
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.005256 pixels
  Position = (299.7, 345.2) = 0 42 52.32 41 18 53.7
  Extent = 4.8" x 4.3", rotation angle = 32
  Source counts = 1298.9 +/- 47.3
  Background counts = 937.7
  Rate = 0.06 +/- 0.002
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Wed Jan 25 05:11:36 2012] Counts = 1298.930000, rescaling region sizes by 2.000000
[Wed Jan 25 05:11:36 2012] XMMSAS src. selection expression = ellipse(26022.598907, 29983.990750, 576.680436, 514.897132, 31.674060, X, Y)
[Wed Jan 25 05:11:36 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src12_src.reg
[Wed Jan 25 05:11:36 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (267, 312) - (333, 378)
[Wed Jan 25 05:11:36 2012] XMMSAS bgd. selection expression = annulus(26022.598907, 29983.990750, 1922.268119, 3844.536237, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(23623.430140, 25807.401200, 523.573615, 423.584012, 72.180000, X, Y) && !ellipse(26938.760820, 25740.492200, 574.288817, 363.121610, 120.784400, X, Y) && !ellipse(25465.852000, 26555.448520, 334.286410, 334.286410, 0.000000, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(26198.822000, 26024.822000, 1097.360032, 383.372011, 42.736000, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(24403.643920, 30474.212400, 374.425611, 374.425611, 0.000000, X, Y) && !ellipse(24359.780400, 26611.151600, 364.713610, 364.713610, 0.000000, X, Y) && !ellipse(23462.952000, 28984.816200, 389.086411, 389.086411, 0.000000, X, Y) && !ellipse(28797.179000, 29790.389200, 388.706411, 388.706411, 0.000000, X, Y) && !ellipse(23551.597200, 32926.416000, 373.166411, 373.166411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(22648.129583, 31675.753811, 513.419505, 381.689611, 98.526645, X, Y) && !ellipse(29928.936646, 31412.179382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.069672, 29610.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(26777.812469, 29107.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24717.793823, 25871.850098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29926.486053, 27481.663391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23340.059296, 26449.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:36 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src12.gif
[Wed Jan 25 05:17:58 2012] Mean detx,y = (2046.17, -3505.93) 
[Wed Jan 25 05:17:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:18:19 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:18:19 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jan 25 05:18:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jan 25 11:55:28 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:28 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jan 25 11:55:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:32 2012] Using photon index=1.80, rate=0.061, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src12.arf
[Wed Jan 25 11:55:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:32 2012] Updating source flux to 7.6e-13