[Mon Jan 23 10:18:06 2012] Detection parameters:
  Position = (352.4, 267.3) = 0 42 31.99 41 13 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1491.1 +/- 47.4
  Background counts = 36.9
  Rate = 0.08 +/- 0.003

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 4.52'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Mon Jan 23 16:12:20 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.69"
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src11.csv
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src11.csv
[Mon Jan 23 20:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jan 24 00:02:38 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.671991 pixels away
[Tue Jan 24 00:02:38 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.218330 pixels away
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Tue Jan 24 07:14:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.69"
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src11.csv
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src11.csv
[Tue Jan 24 10:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jan 24 10:34:30 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jan 24 14:44:22 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.669826 pixels away
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:37 2012] Counts = 1491.121216, rescaling region sizes by 2.000000
[Wed Jan 25 05:11:37 2012] XMMSAS src. selection expression = ellipse(30611.565918, 23208.133545, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src10_src.reg
[Wed Jan 25 05:11:37 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (277, 192) - (427, 342)
[Wed Jan 25 05:11:37 2012] XMMSAS bgd. selection expression = annulus(30611.565918, 23208.133545, 4350.000000, 8700.000000, X, Y) && !ellipse(29422.012000, 26872.684000, 647.401619, 647.401619, 0.000000, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(21933.053200, 25116.783600, 418.588812, 418.588812, 0.000000, X, Y) && !ellipse(23623.430140, 25807.401200, 523.573615, 423.584012, 72.180000, X, Y) && !ellipse(26938.760820, 25740.492200, 574.288817, 363.121610, 120.784400, X, Y) && !ellipse(26022.598907, 29983.990750, 384.453624, 343.264755, 31.674060, X, Y) && !ellipse(25465.852000, 26555.448520, 334.286410, 334.286410, 0.000000, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(32683.333667, 25985.371166, 383.590957, 375.027362, 357.206060, X, Y) && !ellipse(30840.028620, 26922.621200, 386.289611, 346.360810, 44.501700, X, Y) && !ellipse(26198.822000, 26024.822000, 1097.360032, 383.372011, 42.736000, X, Y) && !ellipse(27471.296200, 20005.024000, 432.784812, 348.901610, 7.918740, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(24403.643920, 30474.212400, 374.425611, 374.425611, 0.000000, X, Y) && !ellipse(36137.128000, 29204.182000, 428.935212, 428.935212, 0.000000, X, Y) && !ellipse(24359.780400, 26611.151600, 364.713610, 364.713610, 0.000000, X, Y) && !ellipse(31480.758789, 22126.846313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33721.160560, 22165.435400, 518.948815, 518.948815, 0.000000, X, Y) && !ellipse(27551.849091, 20210.938675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.244800, 21249.082680, 340.299210, 340.299210, 0.000000, X, Y) && !ellipse(33641.986600, 24113.306400, 403.492812, 366.220011, 313.803542, X, Y) && !ellipse(23462.952000, 28984.816200, 389.086411, 389.086411, 0.000000, X, Y) && !ellipse(31517.762741, 19290.274220, 641.724308, 495.040677, 325.146427, X, Y) && !ellipse(28681.624600, 23436.979800, 372.974411, 372.974411, 0.000000, X, Y) && !ellipse(34920.874939, 29931.886383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31975.019100, 30386.412840, 363.812010, 363.812010, 0.000000, X, Y) && !ellipse(32798.315600, 23569.009200, 271.715208, 271.715208, 0.000000, X, Y) && !ellipse(24755.659851, 20736.966354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28311.766842, 24995.537600, 369.662411, 369.662411, 0.000000, X, Y) && !ellipse(28797.179000, 29790.389200, 388.706411, 388.706411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(30830.196960, 30854.551544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.129583, 31675.753811, 513.419505, 381.689611, 98.526645, X, Y) && !ellipse(29928.936646, 31412.179382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32485.060600, 23565.830000, 1491.344043, 1491.344043, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32781.046000, 24052.090000, 2268.256065, 2268.256065, 0.000000, X, Y) && !ellipse(25366.069672, 29610.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(26777.812469, 29107.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35237.208405, 20282.721375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24717.793823, 25871.850098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22372.524800, 22648.703500, 344.946410, 344.946410, 0.000000, X, Y) && !ellipse(35731.112885, 28548.244415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35129.682200, 28850.157000, 249.829607, 249.829607, 0.000000, X, Y) && !ellipse(34394.219440, 31948.957000, 508.881615, 265.452008, 53.290100, X, Y) && !ellipse(29926.486053, 27481.663391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32740.476200, 16527.352200, 523.138722, 523.138722, 0.000000, X, Y) && !ellipse(23340.059296, 26449.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24041.865880, 23271.674200, 393.641611, 393.641611, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(34431.563660, 28868.241821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27653.512817, 24240.414246, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:37 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src10.gif
[Wed Jan 25 05:19:26 2012] Mean detx,y = (-1112.08, 4101.58) 
[Wed Jan 25 05:19:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:21:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:21:28 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jan 25 05:21:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jan 25 06:22:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 06:22:39 2012] rmf not generated due to insufficient counts
[Wed Jan 25 11:55:28 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:28 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jan 25 11:55:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:32 2012] Using photon index=1.80, rate=0.0817, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src10.arf
[Wed Jan 25 11:55:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:32 2012] Updating source flux to 7.9e-13
[Wed Jan 25 11:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting