[Mon Jan 23 10:18:06 2012] Detection parameters:
  Position = (335.8, 304.3) = 0 42 38.38 41 16 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9678.7 +/- 154.3
  Background counts = 49.6
  Rate = 0.6 +/- 0.009

[Mon Jan 23 10:18:08 2012] Off-axis axis estimate = 2.74'
[Mon Jan 23 16:12:20 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:12:20 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Mon Jan 23 16:12:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Mon Jan 23 16:12:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.80"
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src1.csv
[Mon Jan 23 20:13:46 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jan 23 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src1.csv
[Mon Jan 23 20:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan 23 20:13:48 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan 23 20:13:48 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 24 00:02:38 2012] Warning, spatial fit 1 centroid is now closest to src. 67
[Tue Jan 24 00:02:38 2012] Spatial fit model total counts = 2566.920000, observed total counts = 2572.000000
[Tue Jan 24 00:02:38 2012] Offset between fit and detection position for source 1 = 4.832435 pixels
[Tue Jan 24 00:02:38 2012] Warning, changing simple spatial fit ID from 1 to 47
[Tue Jan 24 00:02:38 2012] 2068.570000 total counts/ 1041.730000 bgd. counts: snr = 31.814507
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.832435 pixels
  Position = (340.4, 305.8) = 0 42 36.61 41 16 2.2
  Extent = 16.5 (16.5-33.0)", rotation angle = 0
  Source counts = 1026.8 +/- 45.5
  Background counts = 1041.7
  Rate = 0.05 +/- 0.002
[Tue Jan 24 00:02:38 2012] Source 1 is offset by 1.681195 and -3.648989 pixels which is larger than
2 X fitted extent = 3.617945 x 3.617945, not incorporating fit results
[Tue Jan 24 00:02:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:02:38 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:02:38 2012] Source does appear to be extended
[Tue Jan 24 00:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 07:14:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 07:14:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 07:14:34 2012] Initial guess for spatial extent in simple fitting = 16.51"
[Tue Jan 24 07:14:34 2012] source mask rpix=3.8, npix_max = 73, mask sum = 68, frac = 0.922
[Tue Jan 24 07:14:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 16.51"
[Tue Jan 24 10:34:28 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src1.csv
[Tue Jan 24 10:34:29 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 24 10:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src1.csv
[Tue Jan 24 10:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 24 10:34:30 2012] fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 24 10:34:30 2012] Fit fullrun_mos1_xmm0551690501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 24 14:44:22 2012] Warning, spatial fit 1 centroid is now closest to src. 72
[Tue Jan 24 14:44:22 2012] Spatial fit model total counts = 1568.210000, observed total counts = 1567.000000
[Tue Jan 24 14:44:22 2012] Offset between fit and detection position for source 1 = 4.012254 pixels
[Tue Jan 24 14:44:22 2012] Warning, changing simple spatial fit ID from 1 to 59
[Tue Jan 24 14:44:22 2012] 1338.797000 total counts/ 1124.820000 bgd. counts: snr = 6.380072
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.012254 pixels
  Position = (338.7, 309.4) = 0 42 37.25 41 16 18.1
  Extent = 8.1 (6.0-10.2)", rotation angle = 0
  Source counts = 214.0 +/- 36.6
  Background counts = 1124.8
  Rate = 0.01 +/- 0.002
[Tue Jan 24 14:44:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 14:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 14:44:23 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 14:44:23 2012] Source does appear to be extended
[Tue Jan 24 14:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:11:36 2012] XMMSAS src. selection expression = ellipse(29422.012000, 26872.684000, 485.551214, 485.551214, 0.000000, X, Y)
[Wed Jan 25 05:11:36 2012] Writing source region out to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan 25 05:11:36 2012] Extracting stamp from image fullrun_mos1_xmm0551690501_pi300-10000_cl_sm2.00.img.gz, (311, 282) - (367, 337)
[Wed Jan 25 05:11:36 2012] XMMSAS bgd. selection expression = annulus(29422.012000, 26872.684000, 809.252023, 1618.504047, X, Y) && !ellipse(27482.462000, 26920.909000, 1080.568031, 515.517615, 27.358000, X, Y) && !ellipse(27161.039200, 27270.563800, 1143.368033, 538.962416, 219.495000, X, Y) && !ellipse(30840.028620, 26922.621200, 386.289611, 346.360810, 44.501700, X, Y) && !ellipse(28278.618000, 26317.444000, 881.984025, 881.984025, 0.000000, X, Y) && !ellipse(28311.766842, 24995.537600, 369.662411, 369.662411, 0.000000, X, Y) && !ellipse(28429.782000, 27498.792000, 1281.416037, 1281.416037, 0.000000, X, Y) && !ellipse(27706.459412, 25795.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32781.046000, 24052.090000, 2268.256065, 2268.256065, 0.000000, X, Y) && !ellipse(27611.613440, 28354.456600, 656.599219, 656.599219, 0.000000, X, Y) && !ellipse(29926.486053, 27481.663391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.649600, 28554.376000, 1960.752056, 1960.752056, 0.000000, X, Y) && !ellipse(30489.761139, 26145.883636, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:11:36 2012] Writing fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1.gif
[Wed Jan 25 05:11:41 2012] Mean detx,y = (1043.55, 1002.29) 
[Wed Jan 25 05:11:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:11:50 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:11:50 2012] Setting source spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 05:11:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan 25 11:55:28 2012] Updating aperture counts using extracted products
[Wed Jan 25 11:55:28 2012] Error reading totcts from fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 11:55:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 11:55:32 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 11:55:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 11:55:32 2012] Updating source flux to 1.1e-13
[Wed Jan 25 11:55:47 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Jan 25 12:03:28 2012] Reading fit data from xmm0551690501/analysis//spectral/fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jan 25 12:03:28 2012] Spectral fit parameter nH value = 1.48757e+21
[Wed Jan 25 12:03:28 2012] Spectral fit parameter PhoIndex value = 1.72101
[Wed Jan 25 12:03:28 2012] Failed to get F(0.3-8.0) from xmm0551690501/analysis//spectral/fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan 25 12:03:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:03:28 2012] Using Nh = 1.5e+21, photon index=1.72, rate=0.0101, arf fullrun_mos1_xmm0551690501_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 12:03:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:03:28 2012] Updating source flux to 1.2e-13