[Wed Jan 25 13:44:38 2012] Detection parameters:
  Position = (352.9, 314.5) = 0 42 30.91 41 16 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4981.4 +/- 82.6
  Background counts = 102.2
  Rate = 0.3 +/- 0.006

[Wed Jan 25 13:44:40 2012] Off-axis axis estimate = 4.12'
[Wed Jan 25 13:48:41 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 13:48:41 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Wed Jan 25 13:48:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.999
[Wed Jan 25 13:48:41 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.49"
[Wed Jan 25 22:20:39 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jan 25 22:20:39 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jan 25 22:20:39 2012] Fit fullrun_pn_xmm0551690301_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed Jan 25 22:20:41 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jan 25 22:20:41 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jan 25 22:20:41 2012] Fit fullrun_pn_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Jan 26 05:51:31 2012] Spatial fit model total counts = 6137.110000, observed total counts = 6121.000000
[Thu Jan 26 05:51:31 2012] Offset between fit and detection position for source 30 = 0.225854 pixels
[Thu Jan 26 05:51:31 2012] 5487.390000 total counts/ 1760.720000 bgd. counts: snr = 88.812846
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.225854 pixels
  Position = (352.7, 314.5) = 0 42 30.99 41 16 21.2
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 3726.7 +/- 74.1
  Background counts = 1760.7
  Rate = 0.2 +/- 0.004
[Thu Jan 26 05:51:31 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 05:51:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 05:51:31 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 05:51:31 2012] Source does appear to be extended
[Thu Jan 26 05:51:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 05:51:32 2012] Source is confused with source 29
[Thu Jan 26 05:52:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 05:52:33 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Thu Jan 26 05:52:33 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.753
[Thu Jan 26 05:52:33 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 5.35"
[Thu Jan 26 12:41:09 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jan 26 12:41:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_src27.csv
[Thu Jan 26 12:41:09 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jan 26 12:41:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_src27.csv
[Thu Jan 26 12:41:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 12:41:11 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jan 26 12:41:11 2012] fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jan 26 12:41:11 2012] Fit fullrun_pn_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jan 26 19:27:29 2012] Spatial fit model total counts = 6752.990000, observed total counts = 6732.000000
[Thu Jan 26 19:27:29 2012] Offset between fit and detection position for source 30 = 0.146466 pixels
[Thu Jan 26 19:27:29 2012] Warning, changing simple spatial fit ID from 27 to 26
[Thu Jan 26 19:27:29 2012] 6187.580000 total counts/ 3607.300000 bgd. counts: snr = 42.961131
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.146466 pixels
  Position = (352.9, 314.4) = 0 42 30.94 41 16 20.9
  Extent = 5.1 (4.8-5.3)", rotation angle = 0
  Source counts = 2580.3 +/- 78.7
  Background counts = 3607.3
  Rate = 0.1 +/- 0.004
[Thu Jan 26 19:27:29 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 19:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 19:27:29 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 19:27:29 2012] Source does appear to be extended
[Thu Jan 26 19:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 19:28:20 2012] Counts = 2580.280000, rescaling region sizes by 2.000000
[Thu Jan 26 19:28:20 2012] XMMSAS src. selection expression = ellipse(30649.558000, 27303.299800, 608.856018, 608.856018, 0.000000, X, Y)
[Thu Jan 26 19:28:20 2012] Writing source region out to fullrun_pn_xmm0551690301_pi300-10000_pass1_cl_src30_src.reg
[Thu Jan 26 19:28:20 2012] Extracting stamp from image fullrun_pn_xmm0551690301_pi300-10000_cl_sm2.00.img.gz, (318, 279) - (388, 349)
[Thu Jan 26 19:28:20 2012] XMMSAS bgd. selection expression = annulus(30649.558000, 27303.299800, 2029.520058, 4059.040117, X, Y) && !ellipse(28970.613800, 26954.686400, 1356.110439, 1356.110439, 0.000000, X, Y) && !ellipse(30144.468000, 32514.156000, 1530.440044, 1530.440044, 0.000000, X, Y) && !ellipse(30634.746979, 31264.620819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31792.792174, 30771.823200, 453.261613, 453.261613, 0.000000, X, Y) && !ellipse(34704.203800, 30009.248600, 436.544013, 436.544013, 0.000000, X, Y) && !ellipse(28594.822000, 30109.722000, 440.918413, 440.918413, 0.000000, X, Y) && !ellipse(26556.458400, 29582.882000, 422.340812, 422.340812, 0.000000, X, Y) && !ellipse(34929.894073, 29266.461700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35544.023590, 29007.421112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.791720, 28647.968000, 1184.408034, 1184.408034, 0.000000, X, Y) && !ellipse(34145.482000, 28488.464000, 375.730411, 375.730411, 0.000000, X, Y) && !ellipse(28134.160736, 28190.941193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30035.732544, 27338.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.622000, 27282.571800, 1151.928033, 1151.928033, 0.000000, X, Y) && !ellipse(27700.427580, 27192.623740, 1036.696030, 1036.696030, 0.000000, X, Y) && !ellipse(32841.201111, 26906.199066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.794205, 26907.769708, 292.804694, 219.519593, 9.814799, X, Y) && !ellipse(26019.140000, 26593.064000, 1108.720032, 289.352808, 323.791000, X, Y) && !ellipse(32498.918000, 26388.088000, 352.293610, 352.293610, 0.000000, X, Y) && !ellipse(29305.973400, 25038.993000, 378.491211, 378.491211, 0.000000, X, Y) && !ellipse(28769.136000, 25030.040000, 293.337608, 293.337608, 0.000000, X, Y) && !ellipse(28134.784000, 25397.076000, 332.736010, 332.736010, 0.000000, X, Y) && !ellipse(32440.904000, 24628.866000, 312.233609, 312.233609, 0.000000, X, Y) && !ellipse(26769.457200, 26163.837600, 558.319216, 558.319216, 0.000000, X, Y) && !ellipse(33477.109833, 24507.228760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32621.493400, 23966.320600, 374.410411, 374.410411, 0.000000, X, Y) && !ellipse(28506.979640, 23830.552000, 409.631212, 409.631212, 0.000000, X, Y) && !ellipse(30422.233400, 23567.945600, 491.721614, 491.721614, 0.000000, X, Y) && !ellipse(34261.113434, 22732.723999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31292.105682, 22536.740356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26518.474518, 28939.813446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28709.734000, 28986.840000, 433.992812, 433.992812, 0.000000, X, Y) && !ellipse(29311.764000, 28442.080000, 733.117621, 733.117621, 0.000000, X, Y) && !ellipse(29959.201324, 28552.611938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29112.116882, 27810.220612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34993.081116, 27828.619965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29634.116882, 27563.109070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30135.041260, 26154.188568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35366.627808, 25889.418427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.729800, 25725.216400, 1230.544035, 1230.544035, 0.000000, X, Y) && !ellipse(30781.628510, 25074.980225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.997681, 24930.020935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.698395, 24666.134918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32008.260010, 24110.824921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29379.640289, 24404.364960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.343079, 24060.265198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27705.944336, 24147.214752, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 19:28:20 2012] Writing fullrun_pn_xmm0551690301_pi300-10000_pass1_cl_src30.gif
[Thu Jan 26 19:59:13 2012] Mean detx,y = (2686.56, -1648.92) 
[Thu Jan 26 19:59:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 19:59:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 19:59:56 2012] Setting source spectrum file to fullrun_pn_xmm0551690301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Jan 26 19:59:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jan 27 09:34:11 2012] Updating aperture counts using extracted products
[Fri Jan 27 09:34:11 2012] Error reading totcts from fullrun_pn_xmm0551690301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jan 27 09:34:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 09:34:12 2012] Using photon index=1.80, rate=0.131, arf fullrun_pn_xmm0551690301_pi300-10000_pass1_cl_src30.arf
[Fri Jan 27 09:34:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 09:34:12 2012] Updating source flux to 3.4e-13
[Fri Jan 27 09:43:32 2012] Flag c found in src. 30 procflags, skipping spectral fitting