[Wed Jan 25 13:46:08 2012] Detection parameters:
  Position = (350.3, 271.2) = 0 42 31.93 41 13 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1505.5 +/- 48.1
  Background counts = 33.3
  Rate = 0.08 +/- 0.003

[Wed Jan 25 13:46:10 2012] Off-axis axis estimate = 4.25'
[Thu Jan 26 02:04:25 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 02:04:25 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Thu Jan 26 02:04:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Thu Jan 26 02:04:25 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.55"
[Thu Jan 26 05:51:00 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jan 26 05:51:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_src11.csv
[Thu Jan 26 05:51:00 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jan 26 05:51:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_src11.csv
[Thu Jan 26 05:51:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 05:51:01 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jan 26 05:51:01 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jan 26 05:51:02 2012] Fit fullrun_mos2_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jan 26 05:52:09 2012] Spatial fit model total counts = 1722.720000, observed total counts = 1723.000000
[Thu Jan 26 05:52:09 2012] Offset between fit and detection position for source 19 = 0.209086 pixels
[Thu Jan 26 05:52:09 2012] 1729.442000 total counts/ 635.662000 bgd. counts: snr = 43.382728
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.209086 pixels
  Position = (350.2, 271.3) = 0 42 32.00 41 13 13.6
  Extent = 6.1 (5.8-6.3)", rotation angle = 0
  Source counts = 1093.8 +/- 41.6
  Background counts = 635.7
  Rate = 0.05 +/- 0.002
[Thu Jan 26 05:52:10 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 05:52:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 05:52:10 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 05:52:10 2012] Source does appear to be extended
[Thu Jan 26 05:52:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 16:25:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:25:50 2012] Initial guess for spatial extent in simple fitting = 6.14"
[Thu Jan 26 16:25:50 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.094
[Thu Jan 26 16:25:50 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.14"
[Thu Jan 26 19:27:05 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jan 26 19:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_src11.csv
[Thu Jan 26 19:27:05 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jan 26 19:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_src11.csv
[Thu Jan 26 19:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 19:27:06 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jan 26 19:27:06 2012] fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jan 26 19:27:06 2012] Fit fullrun_mos2_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jan 26 19:27:57 2012] Spatial fit model total counts = 1723.290000, observed total counts = 1723.000000
[Thu Jan 26 19:27:57 2012] Offset between fit and detection position for source 19 = 0.004224 pixels
[Thu Jan 26 19:27:57 2012] 1730.022000 total counts/ 639.442000 bgd. counts: snr = 43.127765
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.004224 pixels
  Position = (350.2, 271.3) = 0 42 31.99 41 13 13.6
  Extent = 6.1 (5.8-6.4)", rotation angle = 0
  Source counts = 1090.6 +/- 41.6
  Background counts = 639.4
  Rate = 0.05 +/- 0.002
[Thu Jan 26 19:27:57 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 19:27:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 19:27:57 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 19:27:57 2012] Source does appear to be extended
[Thu Jan 26 19:27:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 06:36:34 2012] Counts = 1090.580000, rescaling region sizes by 2.000000
[Fri Jan 27 06:36:34 2012] XMMSAS src. selection expression = ellipse(30416.233440, 23557.722800, 730.666821, 730.666821, 0.000000, X, Y)
[Fri Jan 27 06:36:34 2012] Writing source region out to fullrun_mos2_xmm0551690301_pi300-10000_pass1_cl_src19_src.reg
[Fri Jan 27 06:36:34 2012] Extracting stamp from image fullrun_mos2_xmm0551690301_pi300-10000_cl_sm2.00.img.gz, (308, 229) - (392, 313)
[Fri Jan 27 06:36:34 2012] XMMSAS bgd. selection expression = annulus(30416.233440, 23557.722800, 2435.556070, 4871.112140, X, Y) && !ellipse(28962.917000, 26952.034000, 431.840012, 431.840012, 0.000000, X, Y) && !ellipse(26765.596920, 26170.124200, 648.699219, 404.396012, 120.148800, X, Y) && !ellipse(25288.612000, 26939.900000, 339.284810, 291.828808, 86.980000, X, Y) && !ellipse(27738.490400, 27049.742200, 1084.472031, 561.428816, 57.691000, X, Y) && !ellipse(30644.799700, 27308.807000, 406.429612, 406.429612, 0.000000, X, Y) && !ellipse(32484.309820, 26372.814200, 393.977611, 328.666409, 61.823400, X, Y) && !ellipse(27273.746000, 27296.061800, 1151.112033, 1151.112033, 0.000000, X, Y) && !ellipse(33533.886000, 22574.932000, 372.691211, 372.691211, 0.000000, X, Y) && !ellipse(27296.307400, 20418.121600, 411.347212, 411.347212, 0.000000, X, Y) && !ellipse(31280.713260, 22542.563600, 396.298411, 396.298411, 0.000000, X, Y) && !ellipse(27545.924780, 21637.101600, 393.221611, 337.262410, 203.392825, X, Y) && !ellipse(25811.688000, 26482.246000, 228.548007, 228.548007, 0.000000, X, Y) && !ellipse(32825.841766, 26904.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33466.771149, 24505.627777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31313.505219, 19699.544189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28491.787872, 23814.250183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26585.625519, 26913.773865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32604.845400, 23955.495220, 358.247210, 358.247210, 0.000000, X, Y) && !ellipse(28129.112000, 25388.716000, 326.244809, 283.588008, 97.267534, X, Y) && !ellipse(28734.648712, 25030.540344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35522.658569, 29023.422974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32435.216600, 24634.499000, 309.895209, 309.895209, 0.000000, X, Y) && !ellipse(27533.866577, 26237.057343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30438.040000, 27324.133400, 1317.880038, 1317.880038, 0.000000, X, Y) && !ellipse(25842.488000, 27867.165800, 307.720009, 307.720009, 0.000000, X, Y) && !ellipse(24637.628000, 29501.256000, 1304.696038, 1304.696038, 0.000000, X, Y) && !ellipse(35032.223660, 20680.207400, 351.441610, 351.441610, 0.000000, X, Y) && !ellipse(27459.347870, 24568.682068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34259.475281, 22771.495392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31995.815887, 24129.529602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24605.568000, 28332.144000, 1162.704033, 1162.704033, 0.000000, X, Y) && !ellipse(34994.982117, 27874.873230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26784.179230, 28389.832092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.043854, 26326.587585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26145.802000, 28986.790000, 1203.400035, 1203.400035, 0.000000, X, Y)
[Fri Jan 27 06:36:34 2012] Writing fullrun_mos2_xmm0551690301_pi300-10000_pass1_cl_src19.gif
[Fri Jan 27 06:47:18 2012] Mean detx,y = (-3862.59, -1999.47) 
[Fri Jan 27 06:47:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 06:47:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 06:47:46 2012] Setting source spectrum file to fullrun_mos2_xmm0551690301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jan 27 06:47:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jan 27 09:34:16 2012] Updating aperture counts using extracted products
[Fri Jan 27 09:34:16 2012] Error reading totcts from fullrun_mos2_xmm0551690301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jan 27 09:34:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 09:34:17 2012] Using photon index=1.80, rate=0.0507, arf fullrun_mos2_xmm0551690301_pi300-10000_pass1_cl_src19.arf
[Fri Jan 27 09:34:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 09:34:17 2012] Updating source flux to 5.8e-13